| SMITH CR-1-7/8-C Cam Follower and Track Roller - Stud Type | rs min:2.1 mm; Number of lubrication holes:3; db min:210 mm; Min operating temperature, Tmin:-40 °C; Characteristic outer ring frequency, BPF0:10.6 Hz; Y1:2.95; da min:210.2 mm; Mass:21.9 kg; e:0.23; Characteristic inner ring frequency, BPFI:13.4 Hz; |
| SMITH CR-2-1/4-X Cam Follower and Track Roller - Stud Type | H1:76 mm; d1:32 mm; G:M6x1; L3:51 mm; B1:28 mm; H:89 mm; A2:21 mm; T max.:100 °C; Adapter sleeve reference:HLK2304; Designation of housing:T204-; |
| SMITH BCR-2-BC Cam Follower and Track Roller - Stud Type | Unit, Type:Insert Bearing Unit; Unit Body Material:Stainless steel silv; Type of Insert Bearing:Cylindrical Bore Sha; Surface Treatment:No; Pillow Type, Category:Standard; Days to Ship:6 Days or more; Rolling Element Material:Stainless Steel; |
| SMITH BCR-1-7/8 Cam Follower and Track Roller - Stud Type | Shaft Size :2-15/16 in; Shaft Tolerance:0.0020 in; Locking Style:Eccentric; Full Timken Part Number:QMSN15J215SB; Dimension G:2.990 in; C0 - Static Load:54100 lb; Dimension A:3.74 in; Dimension R:0.24 in; Eng Internal Radial Clearance - Min:0.0020; Oil Lubrication - T Seal:2900 rpm; |
| SMITH FCR-4 Cam Follower and Track Roller - Stud Type | C0:7.88 kN; Designation of bearing:UC205-15G2T20; J:70 mm; T min.:-20 °C; Recommended tightening torque for set screw:3.7 Nm; N:11,5mm; d:23.81 mm; A1:11 mm; B:34 mm; L:95 mm; |
| SMITH HR-1-XC Cam Follower and Track Roller - Stud Type | Da - Cup Frontface Backing Diameter:66.00 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2700 lbf; Aa - Cage-Cone Backface Clearance:7.6 mm; Db - Cup Backface Backing Diameter:60.96 mm; Design Units:Imperial; C1 - Dynamic Radial Rating (1 million revolutions)5:15100 lbf; R - Cone Backface To Clear Radius1:1.520 mm; G1 - Heat Generation Factor (Roller-Raceway):20.7; C90 - Dynamic Radial Rating (90 million revolutions)4:3920 lbf; |
| SMITH CR-1-1/8 Cam Follower and Track Roller - Stud Type | d:36.51 mm; J:130 mm; G:M6x1; Recommended tightening torque for set screw:8 Nm; A2:42.5 mm; e:19 mm; C0:15.2 kN; A1:14 mm; H:161 mm; T min.:-20 °C; |
| SMITH IRR-5/8 Needle Non Thrust Roller Bearings | B2:49.5 mm; C:29 mm; Category:Bearings; Cr:62 kN; Characteristic cage frequency, FTF:0.43 Hz; h:8 mm; Weight / Kilogram:1.174; Min operating temperature, Tmin:-20 °C; C1:0.8 mm; Bearing with/without cage:Sans; |
| SMITH BCR-3-XBC Cam Follower and Track Roller - Stud Type | Unit, Type:Insert Bearing Unit; Diameter series symbol:Used for Light load; Bearing Inner Dia. Shape:Tapered hole adapter; Surface Treatment:No; Fit:J7; Rolling Element Material:Bearing Steel; Basic Load Rating, Dynamic Rating(N):14000; Basic Load Rating, Static Rating(N):7850; |
| SMITH FCR-2-E Cam Follower and Track Roller - Stud Type | Stroke:No; Seal:Triple seals; Machining:No; Fit:J7; RoHS:6; Bearing Unit, Type:Diamond Flange Shape; Basic Load Rating, Dynamic Rating(N):34100; Accessory:No Cover; |
| SMITH HR-1-3/8-XC Cam Follower and Track Roller - Stud Type | Nlim (grease):5,800 rpm; F:72 mm; Da max:102 mm; Brand:NTN; rs min:1.5 mm; Mass (without HJ ring):0.82 kg; r1s min:1.5 mm; Nlim (oil):6,800 rpm; Dynamic load, C:97.5 kN; Static load, C0:107 kN; |
| SMITH MYRV-10-SC Cam Follower and Track Roller - Yoke Type | D:72 mm; Minimum Buy Quantity:N/A; Internal Special Features:No; Characteristic outer ring frequency, BPF0:3.56 Hz; Outer Race Width:0.669 Inch | 17 Mill; Internal Clearance:C3-Loose; Static load, C0:15.3 kN; Precision Class:ABEC 1 | ISO P0; Noun:Bearing; |
| SMITH CR-1-1/4-XBE Cam Follower and Track Roller - Stud Type | C:25.7 kN; s1:16 mm; J:92 mm; Weight:1.42 kg; T max.:100 °C; B:32 mm; A2:42.5 mm; Recommended tightening torque for set screw:5.5 Nm; e:19 mm; d:35 mm; |
| SMITH HR-1-7/8-X Cam Follower and Track Roller - Stud Type | Shape:Flange Type; RoHS:6; Bearing Part Number:625; Volume Discount:Available; Holder Surface Treatment:Black Oxide Coating; Type:Bearings with Housin; Bearing Retained:No; Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel; |