No. | Brand | J | R | F | d | t | S | r | Z |
HR-1/2-C | SMITH | - | - | 204 mm | - | - | - | - | - |
MCRV-62-SC | SMITH | - | - | - | 2.2500 in | - | - | - | - |
CR-2-XBC-SS | SMITH | 202 mm | - | - | - | - | 12 mm | - | - |
BYR-1-3/8-XC | SMITH | - | - | - | 20 | - | - | - | - |
BYR-1-1/4-XC | SMITH | - | - | - | - | - | - | - | - |
MFCR-35 | SMITH | - | - | - | 130 | - | - | - | - |
CR-5/8-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
MCR-26-S | SMITH | - | - | - | - | - | - | - | - |
MCRV-72-S | SMITH | - | - | - | 50 mm | - | - | - | - |
HR-1-3/8-XC | SMITH | - | - | 72 mm | - | - | - | - | - |
HR-7/8 | SMITH | - | - | - | - | - | - | - | - |
BCR-5/8-X | SMITH | - | - | - | - | - | - | - | - |
MCR-13-SC | SMITH | - | - | - | - | - | - | - | - |
HR-3-B | SMITH | - | - | - | - | - | - | - | - |
MCR-47-C | SMITH | - | - | - | 80 | - | - | - | - |
YR-1-3/4-X | SMITH | - | - | - | - | - | - | - | - |
MYR-5 | SMITH | 92 mm | - | - | - | - | 9.5 mm | - | - |
HR-1-1/2-XB | SMITH | - | - | - | - | - | - | - | - |
YR-3/4-SS | SMITH | - | - | - | - | - | - | - | - |
CR-11/16-B | SMITH | - | - | - | - | - | - | - | - |
BCR-7/8-X | SMITH | - | - | - | - | - | - | - | - |
SMITH HR-1/2-C Cam Follower and Track Roller - Stud Type | Product Group:B04144; F:204 mm; Category:Bearings; Brand:NTN; Da max:324 mm; Characteristic inner ring frequency, BPFI:8.33 Hz; Characteristic outer ring frequency, BPF0:5.67 Hz; Minimum Buy Quantity:N/A; E:300 mm; B:68 mm; |
SMITH CR-1-1/8-XBE Cam Follower and Track Roller - Stud Type | Width T(mm):40 ~ 70; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):15; Type:Bearings with Housin; Shape:Flanged Pilot Type; Days to Ship:7 Days; Housing Material:1045 Carbon Steel; |
SMITH MYR-5 Cam Follower and Track Roller - Yoke Type | S:9.5 mm; C0:15.2 kN; A:34 mm; A2:48.4 mm; Designation of housing:F207N-; N:14mm; e:19 mm; J:92 mm; B1:38.9 mm; B:25.4 mm; |
SMITH HR-2-1/2 Cam Follower and Track Roller - Stud Type | Brand:SNR; Static load, C0:1,400 kN; Number of lubrication holes:3; Fatigue limit load, Cu:113 kN; Characteristic rolling element frequency, BSF:4.96 Hz; b:18.9 mm; d2:164.7 mm; D:280 mm; Y1:2.06; Nref:1,800 rpm; |
SMITH CR-1-1/8 Cam Follower and Track Roller - Stud Type | d:36.51 mm; J:130 mm; G:M6x1; Recommended tightening torque for set screw:8 Nm; A2:42.5 mm; e:19 mm; C0:15.2 kN; A1:14 mm; H:161 mm; T min.:-20 °C; |
SMITH BCR-1-1/4-C Cam Follower and Track Roller - Stud Type | Cone Part Number:HM265049DW; Design Units:Imperial; C - Cup Width:3.1250 in; Db - Cup Backface Backing Diameter:19.17 in; Cup Part Number:HM265010; T - Bearing Width across Cups:7.3124 in; Aa - Cage-Cone Backface Clearance:0 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:75400 lbf; B - Double Cone Width:7.3125 in; Cage Type:Pin-Type; |
SMITH HR-3-B Cam Follower and Track Roller - Stud Type | Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Bearing Material:Steel; Number of Bearings:Double; Housing Material:[Aluminum Alloy] 201; Seals:ZZ (Double Shield); Shape:Flange Type; Holder Width(inch):2; |
SMITH HR-2-3/4-XBC Cam Follower and Track Roller - Stud Type | B1:43.7 mm; Recommended tightening torque for set screw:11.5 Nm; T min.:-40 °C; A:48 mm; Z:84.5 mm; L1:54.5 mm; L:192 mm; B:30.2 mm; T max.:100 °C; Dz:95 mm; |
SMITH BCR-3-XBC Cam Follower and Track Roller - Stud Type | Unit, Type:Insert Bearing Unit; Diameter series symbol:Used for Light load; Bearing Inner Dia. Shape:Tapered hole adapter; Surface Treatment:No; Fit:J7; Rolling Element Material:Bearing Steel; Basic Load Rating, Dynamic Rating(N):14000; Basic Load Rating, Static Rating(N):7850; |
SMITH CR-1/2-A-XBE Cam Follower and Track Roller - Stud Type | Type:Bearings with Housin; Bearing Material:[Steel] Steel; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; Width T(mm):40 ~ 70; RoHS:6; Bearing Part Number:6201; |
SMITH CR-1-1/4-XBE Cam Follower and Track Roller - Stud Type | C:25.7 kN; s1:16 mm; J:92 mm; Weight:1.42 kg; T max.:100 °C; B:32 mm; A2:42.5 mm; Recommended tightening torque for set screw:5.5 Nm; e:19 mm; d:35 mm; |
SMITH HR-1-3/4-C Cam Follower and Track Roller - Stud Type | RoHS:6; Preload Mark:No; Outer Ring:With Outer Ring; Load Direction:Radial; Outer Ring Shape:Flat; I.D.(Ø):50; Symbol of Bearing Ring Shape:No; Bearing Style:Open Type; Type symbol:No; Precision Grade Symbol:No; |
SMITH CR-1-7/8-SS Cam Follower and Track Roller - Stud Type | G:R1/8"; Designation of closed end cover:SCC205; A2:38.7 mm; Recommended tightening torque for set screw:3.7 Nm; s1:17 mm; A1:11 mm; Weight:0.84 kg; C:14 kN; d:25.4 mm; Designation of bearing:UC205-16G2; |
SMITH HR-1/2-XBC Cam Follower and Track Roller - Stud Type | Designation of bearing:EX201G2T04; Designation of housing:FCE204-; A1:8 mm; N:9mm; J:78 mm; A2:28.5 mm; C0:6.65 kN; d:12 mm; B1:43.5 mm; A:18 mm; |
SMITH IRR-5/8 Needle Non Thrust Roller Bearings Video