| SMITH HR-1-1/2-XB Cam Follower and Track Roller - Stud Type | Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit; Fit:J7; RoHS:6; Basic Load Rating, Dynamic Rating(N):96100; Bearing Inner Dia. Shape:Cylindrical Bore Set; Grease Type:SH33M; |
| SMITH BYR-2-1/4-X Cam Follower and Track Roller - Yoke Type | C:31.85 kN; Designation of housing:PG209N-; C0:20.8 kN; Designation of open end cover:SCOU209-28; E:22 mm; Recommended tightening torque for set screw:8 Nm; Z:70.3 mm; T max.:100 °C; Weight:2.18 kg; Designation of bearing:UC209-28G2T04; |
| SMITH BCR-1-B Cam Follower and Track Roller - Stud Type | High-Speed Steel:Standard; Number of Raceway Ring Rows:Single Row; Inner/Outer Ring Material:Steel; Combination of two pieces:Standard; D:150; Specifications:Standard; Raceway Ring Shape:Cylindrical Roller; Cylinder shape (suffix symbol: X):No; Symbol of Bearing Ring Shape:No symbol: Internal; Outer ring oil hole:Standard; |
| SMITH CR-3-1/2-XC Cam Follower and Track Roller - Stud Type | s1:53.2 mm; Z:30.5 mm; C:52.5 kN; L1:32 mm; B:61.8 mm; d:60 mm; C0:32.8 kN; Designation of bearing:EX212G2; E:20 mm; B1:77.7 mm; |
| SMITH BCR-5/8-X Cam Follower and Track Roller - Stud Type | Bearing Type:Split Cylindrical Re; Pillow/Plummer Block Style:Split Cylindrical Ho; Shaft Size:3 in; Cor - Static Load Rating:36194 lbf; Note:This product line wa; Bearing Number:LSE300BR; Cr - Dynamic Load Rating:31024 lbf; Dimension J:260 mm; Bolt Size:2 x M20; Dimension H2:208 mm; |
| SMITH MCR-13-SC Cam Follower and Track Roller - Stud Type | f0:13.2; Db min:141.5 mm; Characteristic outer ring frequency, BPF0:3.07 Hz; rs min:2.1 mm; b min:3.1 mm; B:31 mm; rNa max:0.5 mm; Brand:SNR; D3 max:125.22 mm; da min:71 mm; |
| SMITH HR-1-XC Cam Follower and Track Roller - Stud Type | Da - Cup Frontface Backing Diameter:66.00 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2700 lbf; Aa - Cage-Cone Backface Clearance:7.6 mm; Db - Cup Backface Backing Diameter:60.96 mm; Design Units:Imperial; C1 - Dynamic Radial Rating (1 million revolutions)5:15100 lbf; R - Cone Backface To Clear Radius1:1.520 mm; G1 - Heat Generation Factor (Roller-Raceway):20.7; C90 - Dynamic Radial Rating (90 million revolutions)4:3920 lbf; |
| SMITH MCR-26-SBC Cam Follower and Track Roller - Stud Type | Outer Ring:With Outer Ring; Rolling Element Material:Steel; Series:No Inner Wheel; d:25; B:30; Days to Ship:6 Days or more; D:37; Specifications/Environment:Standard; Raceway Ring Shape:Needle Roller; Outer Ring Type:Flat; |
| SMITH CR-1-1/8 Cam Follower and Track Roller - Stud Type | d:36.51 mm; J:130 mm; G:M6x1; Recommended tightening torque for set screw:8 Nm; A2:42.5 mm; e:19 mm; C0:15.2 kN; A1:14 mm; H:161 mm; T min.:-20 °C; |
| SMITH HR-1-7/8-X Cam Follower and Track Roller - Stud Type | Shape:Flange Type; RoHS:6; Bearing Part Number:625; Volume Discount:Available; Holder Surface Treatment:Black Oxide Coating; Type:Bearings with Housin; Bearing Retained:No; Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel; |
| SMITH BCR-5/8-C Cam Follower and Track Roller - Stud Type | Bearing Material:[Steel] Steel; Height Indication:Height Configurable; Bearing I.D. d(mm):6; Lateral Width L(mm):36; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Days to Ship:8 Days; Shape:L-Shaped; Bearing Used:Deep Groove Ball Bea; |
| SMITH MCRV-62-SC Cam Follower and Track Roller - Stud Type | C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:95300 lbf; Ab - Cage-Cone Frontface Clearance:0.08 in; G1 - Heat Generation Factor (Roller-Raceway):83.2; Aa - Cage-Cone Backface Clearance:0.13 in; db - Cone Backface Backing Diameter:3.15 in; Cage Type:Stamped Steel; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:24700 lbf; d:2.2500 in; Design Units:Imperial; Cg - Geometry Factor:0.0827; |
| SMITH MCRV-47-C Cam Follower and Track Roller - Stud Type | T min.:-20 °C; B:23.8 mm; Recommended tightening torque for set screw:11.5 Nm; G:R1/8"; C0:11.2 kN; e:20 mm; S:9 mm; C:19.5 kN; N:11,5mm; J:82.5 mm; |
| SMITH HR-2-3/4-XBC Cam Follower and Track Roller - Stud Type | B1:43.7 mm; Recommended tightening torque for set screw:11.5 Nm; T min.:-40 °C; A:48 mm; Z:84.5 mm; L1:54.5 mm; L:192 mm; B:30.2 mm; T max.:100 °C; Dz:95 mm; |