| SMITH CR-5/8-A-XC Cam Follower and Track Roller - Stud Type | H1:15 mm; L:150 mm; Designation of housing:PA212-; N:M16; L1:52 mm; C:52.5 kN; G:M6x1; C0:32.8 kN; E:25 mm; T max.:200 °C; |
| SMITH CR-1-1/8-XBE Cam Follower and Track Roller - Stud Type | Width T(mm):40 ～ 70; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):15; Type:Bearings with Housin; Shape:Flanged Pilot Type; Days to Ship:7 Days; Housing Material:1045 Carbon Steel; |
| SMITH HR-1-1/2-XB Cam Follower and Track Roller - Stud Type | Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit; Fit:J7; RoHS:6; Basic Load Rating, Dynamic Rating(N):96100; Bearing Inner Dia. Shape:Cylindrical Bore Set; Grease Type:SH33M; |
| SMITH MCR-13-SC Cam Follower and Track Roller - Stud Type | f0:13.2; Db min:141.5 mm; Characteristic outer ring frequency, BPF0:3.07 Hz; rs min:2.1 mm; b min:3.1 mm; B:31 mm; rNa max:0.5 mm; Brand:SNR; D3 max:125.22 mm; da min:71 mm; |
| SMITH CR-1-1/8 Cam Follower and Track Roller - Stud Type | d:36.51 mm; J:130 mm; G:M6x1; Recommended tightening torque for set screw:8 Nm; A2:42.5 mm; e:19 mm; C0:15.2 kN; A1:14 mm; H:161 mm; T min.:-20 °C; |
| SMITH FCR-2-E Cam Follower and Track Roller - Stud Type | Stroke:No; Seal:Triple seals; Machining:No; Fit:J7; RoHS:6; Bearing Unit, Type:Diamond Flange Shape; Basic Load Rating, Dynamic Rating(N):34100; Accessory:No Cover; |
| SMITH HR-2-1/2 Cam Follower and Track Roller - Stud Type | Brand:SNR; Static load, C0:1,400 kN; Number of lubrication holes:3; Fatigue limit load, Cu:113 kN; Characteristic rolling element frequency, BSF:4.96 Hz; b:18.9 mm; d2:164.7 mm; D:280 mm; Y1:2.06; Nref:1,800 rpm; |
| SMITH BCR-1-5/8-XBC Cam Follower and Track Roller - Stud Type | Designation of housing:FC211-; d:55 mm; e:13 mm; A1:13 mm; C0:29.2 kN; B:55.6 mm; S:22.2 mm; G:M6x1; s1:27.8 mm; T min.:-40 °C; |
| SMITH BCR-2-BC Cam Follower and Track Roller - Stud Type | Unit, Type:Insert Bearing Unit; Unit Body Material:Stainless steel silv; Type of Insert Bearing:Cylindrical Bore Sha; Surface Treatment:No; Pillow Type, Category:Standard; Days to Ship:6 Days or more; Rolling Element Material:Stainless Steel; |
| SMITH CR-1/2-B-SS Cam Follower and Track Roller - Stud Type | Shape:Flange Type; Flange Shape:Compact Type; RoHS:6; Housing Material:1045 Carbon Steel; Bearing Material:[Steel] Steel; Flange O.D. H(φ):45; Days to Ship:7 Days; Number of Bearings:Single; Width T(mm):11; Seals:VV (Non-Contact Rubb; |
| SMITH MCRV-40-S Cam Follower and Track Roller - Stud Type | L Dimension Tolerance:+0.000/-0.005; L(inch):0.125 ～ 2; RoHS:6; Material:Low Carbon Steel; Days to Ship:8 Days; D(inch):7; Surface Treatment:Electoless Nickel Pl; |
| SMITH FCR-4 Cam Follower and Track Roller - Stud Type | C0:7.88 kN; Designation of bearing:UC205-15G2T20; J:70 mm; T min.:-20 °C; Recommended tightening torque for set screw:3.7 Nm; N:11,5mm; d:23.81 mm; A1:11 mm; B:34 mm; L:95 mm; |
| SMITH HR-1/2-C Cam Follower and Track Roller - Stud Type | Product Group:B04144; F:204 mm; Category:Bearings; Brand:NTN; Da max:324 mm; Characteristic inner ring frequency, BPFI:8.33 Hz; Characteristic outer ring frequency, BPF0:5.67 Hz; Minimum Buy Quantity:N/A; E:300 mm; B:68 mm; |
| SMITH MFCR-35 Cam Follower and Track Roller - Stud Type | Unit, Type:Bearing unit; Lubrication method:Oil Supply Type; Unit Body Material:Cast Iron; d:130; Bearing Unit, Type:Take-Up Type; Basic Dynamic Load Rating Cr(N):150000; Bearing Inner Dia. Shape:Cylindrical Bore Set; Days to Ship:Quote; |