No. | Brand | J | R | F | d | t | S | r | Z |
MCRV-47-B | SMITH | - | - | - | - | - | 18.8 mm | - | - |
MCRV-85-SB | SMITH | - | - | - | - | - | - | - | - |
PCR-1-1/2 | SMITH | - | - | - | 45 | - | - | - | - |
YR-3/4-SS | SMITH | - | - | - | - | - | - | - | - |
MUTD-1747 | SMITH | - | - | - | - | - | - | - | - |
CR-1-7/8-C | SMITH | - | - | - | - | - | - | - | - |
CR-2-3/4-XBE | SMITH | - | - | - | 10 | - | - | - | - |
YAG-60 | SMITH | - | - | 14 mm | - | 1 mm | - | - | - |
BCR-7/8-X | SMITH | - | - | - | - | - | - | - | - |
MCRV-80-S | SMITH | - | - | - | - | - | - | - | - |
MCR-52-C | SMITH | - | - | - | - | - | - | - | - |
BCR-1-5/8-XB | SMITH | - | - | - | - | - | - | - | - |
HR-1/2-XBC | SMITH | 78 mm | - | - | 12 mm | - | - | - | - |
YR-1-3/4-X | SMITH | - | - | - | - | - | - | - | - |
CR-1-BC | SMITH | 160 mm | - | - | - | - | - | - | - |
HR-1-7/8-C | SMITH | - | - | - | - | - | - | - | - |
MVYR-200 | SMITH | - | - | - | - | - | - | - | - |
YAD-03 | SMITH | - | - | - | - | - | - | - | - |
CR-5/8-A-XC | SMITH | - | - | - | - | - | - | - | - |
CR-1-1/2-XBC | SMITH | - | - | - | - | - | - | - | - |
PCR-1-3/4 | SMITH | - | - | - | - | - | - | - | - |
HR-1-1/2-XB | SMITH | - | - | - | - | - | - | - | - |
SMITH CR-1-7/8-B Cam Follower and Track Roller - Stud Type | C0:23.2 kN; S:19 mm; H1:14 mm; G:M6x1; B:51.6 mm; C:35.1 kN; A:60 mm; H:57.2 mm; L:130 mm; L1:35 mm; |
SMITH DYR-1-3/4 Cam Follower and Track Roller - Yoke Type | Category:Single Row Ball Bear; Max operating temperature, Tmax:120 °C; Inventory:0.0; Enclosure:2 Metal Shields; Long Description:40MM Bore; 62MM Outs; b max:1.2 mm; Inner Race Width:0 Inch | 0 Millimete; Maximum Capacity / Filling Slot:No; Other Features:Deep Groove | With S; |
SMITH DCR-2 Cam Follower and Track Roller - Stud Type | Bearing Unit, Type:Square flange shape; Accessory:With steel plate cov; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Stroke:No; RoHS:6; Machining:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Grease Type:SH33M; |
SMITH HR-1-5/8-XC Cam Follower and Track Roller - Stud Type | Cg - Geometry Factor:0.0938; da - Cone Frontface Backing Diameter:2.44 in; db - Cone Backface Backing Diameter:2.48 in; C0 - Static Radial Rating:46200 lbf; R - Cone Backface To Clear Radius3:0.03 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:5090 lbf; Ab - Cage-Cone Frontface Clearance:0.07 in; Aa - Cage-Cone Backface Clearance:0.08 in; G2 - Heat Generation Factor (Rib-Roller End):16.1; |
SMITH HR-1-3/8-XC Cam Follower and Track Roller - Stud Type | Nlim (grease):5,800 rpm; F:72 mm; Da max:102 mm; Brand:NTN; rs min:1.5 mm; Mass (without HJ ring):0.82 kg; r1s min:1.5 mm; Nlim (oil):6,800 rpm; Dynamic load, C:97.5 kN; Static load, C0:107 kN; |
SMITH CR-3/4-B-SS Cam Follower and Track Roller - Stud Type | Rolling Element Material:Bearing Steel; Stroke:No; Unit Body Material:Cast Iron; Unit, Type:Insert Bearing Unit; Days to Ship:8 Days; Accessory:With cast iron cover; Basic Load Rating, Dynamic Rating(N):52400; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; |
SMITH MCRV-62-SC Cam Follower and Track Roller - Stud Type | C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:95300 lbf; Ab - Cage-Cone Frontface Clearance:0.08 in; G1 - Heat Generation Factor (Roller-Raceway):83.2; Aa - Cage-Cone Backface Clearance:0.13 in; db - Cone Backface Backing Diameter:3.15 in; Cage Type:Stamped Steel; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:24700 lbf; d:2.2500 in; Design Units:Imperial; Cg - Geometry Factor:0.0827; |
SMITH HR-1-XC Cam Follower and Track Roller - Stud Type | Da - Cup Frontface Backing Diameter:66.00 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2700 lbf; Aa - Cage-Cone Backface Clearance:7.6 mm; Db - Cup Backface Backing Diameter:60.96 mm; Design Units:Imperial; C1 - Dynamic Radial Rating (1 million revolutions)5:15100 lbf; R - Cone Backface To Clear Radius1:1.520 mm; G1 - Heat Generation Factor (Roller-Raceway):20.7; C90 - Dynamic Radial Rating (90 million revolutions)4:3920 lbf; |
SMITH CR-1-3/8-XB Cam Follower and Track Roller - Stud Type | A1:18 mm; Designation of bearing:UC212-38G2; A:48 mm; T min.:-20 °C; B:65.1 mm; C:52.5 kN; Weight:3.83 kg; S:25.4 mm; G:M6x1; C0:32.8 kN; |
SMITH BCR-3-XBC Cam Follower and Track Roller - Stud Type | Unit, Type:Insert Bearing Unit; Diameter series symbol:Used for Light load; Bearing Inner Dia. Shape:Tapered hole adapter; Surface Treatment:No; Fit:J7; Rolling Element Material:Bearing Steel; Basic Load Rating, Dynamic Rating(N):14000; Basic Load Rating, Static Rating(N):7850; |
SMITH CR-1-1/2-XBC Cam Follower and Track Roller - Stud Type | B:50.800 mm; Aa - Cage-Cone Backface Clearance:4.6 mm; B - Cone Width:50.8 mm; Cup Part Number:L357010; Cone Part Number:L357040; Da - Cup Frontface Backing Diameter:380.00 mm; Cage Type:Stamped Steel; Cg - Geometry Factor:0.158; C1 - Dynamic Radial Rating (1 million revolutions)5:132000 lbf; a - Effective Center Location3:12.7 mm; |
SMITH CR-1-7/8-C Cam Follower and Track Roller - Stud Type | rs min:2.1 mm; Number of lubrication holes:3; db min:210 mm; Min operating temperature, Tmin:-40 °C; Characteristic outer ring frequency, BPF0:10.6 Hz; Y1:2.95; da min:210.2 mm; Mass:21.9 kg; e:0.23; Characteristic inner ring frequency, BPFI:13.4 Hz; |
SMITH CR-1/2-BC-SS Cam Follower and Track Roller - Stud Type | SW:3.97 mm; A2:35 mm; A:49 mm; Designation of housing:T209-; T min.:-20 °C; N2:49 mm; Recommended tightening torque for set screw:8 Nm; A1:16 mm; N1:19 mm; Designation of bearing:EX209-26G2L4; |
SMITH MCR-40-SC Cam Follower and Track Roller - Stud Type | L:68 mm; A2:39.4 mm; Dz:60 mm; S:7.5 mm; e:16 mm; Z:48.2 mm; A1:13 mm; d1:37.4 mm; Designation of housing:FL205N-; s1:24.2 mm; |
SMITH CR-1/2-A-XC Cam Follower and Track Roller - Stud Type Video