| No. | Brand | J | R | F | d | t | S | r | Z |
| BYR-2-1/4-X | SMITH | - | - | - | - | - | - | - | 70.3 mm |
| BCR-1-B | SMITH | - | - | - | - | - | - | - | - |
| MCRV-62-SC | SMITH | - | - | - | 2.2500 in | - | - | - | - |
| FCR-4 | SMITH | 70 mm | - | - | 23.81 mm | - | - | - | - |
| MYRV-10-SC | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/8-XB | SMITH | - | - | - | - | - | 25.4 mm | - | - |
| CR-1-5/8-XBEC | SMITH | - | - | - | - | - | - | - | - |
| MCR-32-B | SMITH | - | - | - | - | - | - | - | - |
| MCR-80-SB | SMITH | - | - | - | 85 mm | - | - | - | - |
| PCR-4 | SMITH | - | - | - | - | - | - | - | - |
| YR-1-7/8 | SMITH | - | - | - | 30 mm | - | - | - | - |
| CR-1-3/8-XBC | SMITH | - | - | - | 34.92 mm | - | - | - | - |
| CR-7/8-BC | SMITH | - | - | - | 85 | - | - | - | - |
| BCR-3-XBC | SMITH | - | - | - | - | - | - | - | - |
| MYRV-15 | SMITH | - | - | - | 25.4 mm | - | - | 0.6 | - |
| HR-1-7/8-C | SMITH | - | - | - | - | - | - | - | - |
| CR-5/8-A-XC | SMITH | - | - | - | - | - | - | - | - |
| MFYR-100 | SMITH | - | - | - | - | - | - | - | - |
| HR-1-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| PCR-1-3/4 | SMITH | - | - | - | - | - | - | - | - |
| YR-1-3/8-SS | SMITH | - | - | - | - | - | - | - | - |
| MYR-5 | SMITH | 92 mm | - | - | - | - | 9.5 mm | - | - |
| CR-1/2-A-XC | SMITH | - | - | - | - | - | - | - | - |
| HR-2-1/2-C | SMITH | - | - | - | 61.91 mm | - | - | - | - |
| BCR-1-5/8-XB | SMITH | - | - | - | - | - | - | - | - |
| IRR-9/16 | SMITH | - | - | - | - | - | - | - | - |
| SMITH HR-1/2-XBC Cam Follower and Track Roller - Stud Type | Designation of bearing:EX201G2T04; Designation of housing:FCE204-; A1:8 mm; N:9mm; J:78 mm; A2:28.5 mm; C0:6.65 kN; d:12 mm; B1:43.5 mm; A:18 mm; |
| SMITH CR-1/2-B-SS Cam Follower and Track Roller - Stud Type | Shape:Flange Type; Flange Shape:Compact Type; RoHS:6; Housing Material:1045 Carbon Steel; Bearing Material:[Steel] Steel; Flange O.D. H(φ):45; Days to Ship:7 Days; Number of Bearings:Single; Width T(mm):11; Seals:VV (Non-Contact Rubb; |
| SMITH BYR-2-1/4-X Cam Follower and Track Roller - Yoke Type | C:31.85 kN; Designation of housing:PG209N-; C0:20.8 kN; Designation of open end cover:SCOU209-28; E:22 mm; Recommended tightening torque for set screw:8 Nm; Z:70.3 mm; T max.:100 °C; Weight:2.18 kg; Designation of bearing:UC209-28G2T04; |
| SMITH MCR-47-SBC Cam Follower and Track Roller - Stud Type | Inner/Outer Ring Material:Steel; Size Standards:Metric System; Rolling Element Material:Steel; Raceway Ring Shape:Self-aligning roller; Retainer Type:Punching; Mass(g):2300; B:43; Shaft Bore Config.:Cylindrical Bore; D:120; Internal Clearance Symbol:No; |
| SMITH HR-1-3/4-C Cam Follower and Track Roller - Stud Type | RoHS:6; Preload Mark:No; Outer Ring:With Outer Ring; Load Direction:Radial; Outer Ring Shape:Flat; I.D.(Ø):50; Symbol of Bearing Ring Shape:No; Bearing Style:Open Type; Type symbol:No; Precision Grade Symbol:No; |
| SMITH HR-7/8 Cam Follower and Track Roller - Stud Type | Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Days to Ship:8 Days; Width T(mm):16; Height H(mm):30 ～ 50; Height Indication:Height Configurable; Shape:Bottom Mount; |
| SMITH MCRV-26-SC Cam Follower and Track Roller - Stud Type | Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Bearing Part Number:6904; Flange O.D. H(φ):72; Number of Bearings:Double; Days to Ship:7 Days; Bearing Retained:Yes (with retaining; |
| SMITH MVYR-100 Cam Follower and Track Roller - Yoke Type | H2:83 mm; L:144 mm; A2:35 mm; P:300 mm; SW:3.97 mm; A1:16 mm; L1:87 mm; A:49 mm; s1:24.6 mm; T max.:100 °C; |
| SMITH MCRV-62-SC Cam Follower and Track Roller - Stud Type | C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:95300 lbf; Ab - Cage-Cone Frontface Clearance:0.08 in; G1 - Heat Generation Factor (Roller-Raceway):83.2; Aa - Cage-Cone Backface Clearance:0.13 in; db - Cone Backface Backing Diameter:3.15 in; Cage Type:Stamped Steel; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:24700 lbf; d:2.2500 in; Design Units:Imperial; Cg - Geometry Factor:0.0827; |
| SMITH FCR-6 Cam Follower and Track Roller - Stud Type | Mount Type:Base Face Type; Lateral Width L(mm):82; Holder Surface Treatment:Black Oxide Coating; Days to Ship:8 Days; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Height H(mm):30 ～ 60; Bearing Part Number:6004; Number of Bearings:Single; |
| SMITH CR-1/2-A-XBE Cam Follower and Track Roller - Stud Type | Type:Bearings with Housin; Bearing Material:[Steel] Steel; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; Width T(mm):40 ～ 70; RoHS:6; Bearing Part Number:6201; |
| SMITH BCR-2-BC Cam Follower and Track Roller - Stud Type | Unit, Type:Insert Bearing Unit; Unit Body Material:Stainless steel silv; Type of Insert Bearing:Cylindrical Bore Sha; Surface Treatment:No; Pillow Type, Category:Standard; Days to Ship:6 Days or more; Rolling Element Material:Stainless Steel; |
| SMITH NUKR-85 Cam Follower and Track Roller - Stud Type | Basic Load Rating, Dynamic Rating(N):52000; Size Standards:Metric System; Retainer Type:No; Inner/Outer Ring Material:Steel; Specifications/Environment:Standard; Precision (JIS):Grade 4; Number of Raceway Ring Rows:Double Row; Specifications:Cylindrical Bore; Lubricant:No; Holder Symbol:No; |
| SMITH CR-1-3/8-XBC Cam Follower and Track Roller - Stud Type | A1:27 mm; L:103 mm; H1:12 mm; H2:93 mm; d:34.92 mm; H:47.6 mm; B:32 mm; G:R1/8"; L1:22.5 mm; C:25.7 kN; |
SMITH CR-1-1/8 Cam Follower and Track Roller - Stud Type Video