| SMITH HR-2-1/2 Cam Follower and Track Roller - Stud Type | Brand:SNR; Static load, C0:1,400 kN; Number of lubrication holes:3; Fatigue limit load, Cu:113 kN; Characteristic rolling element frequency, BSF:4.96 Hz; b:18.9 mm; d2:164.7 mm; D:280 mm; Y1:2.06; Nref:1,800 rpm; |
| SMITH YAG-60 Cam Follower and Track Roller - Yoke Type | outside diameter:0.5512 in; inside diameter:0.3937 in; rs min:0.3 mm; Brand:NTN; F:14 mm; Lubrication hole on inner ring:Non/No; bore type:Round; B:12 mm; ras max:0.3 mm; t:1 mm; |
| SMITH CR-1-3/8-XBC-SS Cam Follower and Track Roller - Stud Type | C:9.55 kN; S:6.5 mm; G:M6x1; C0:4.78 kN; e:10 mm; A:20 mm; B1:28.6 mm; J:76.1 mm; Designation of housing:FTE202-; Recommended tightening torque for set screw:5.5 Nm; |
| SMITH MCR-40-SC Cam Follower and Track Roller - Stud Type | L:68 mm; A2:39.4 mm; Dz:60 mm; S:7.5 mm; e:16 mm; Z:48.2 mm; A1:13 mm; d1:37.4 mm; Designation of housing:FL205N-; s1:24.2 mm; |
| SMITH BCR-2-B Cam Follower and Track Roller - Stud Type | Bearing Retained:No; Bearing Part Number:6201; Width T(mm):45 ～ 55; Days to Ship:7 Days; Bearing I.D. d(mm):12; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Seals:ZZ (Double Shield); Type:Bearings with Housin; |
| SMITH HR-1-7/8-XB Cam Follower and Track Roller - Stud Type | Cg - Geometry Factor:0.102; Design Units:Imperial; Series:77000; d:3.7500 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:34500 lbf; C90 - Dynamic Radial Rating (90 million revolutions)5:19800 lbf; Cage Type:Stamped Steel; a - Effective Center Location4:-0.38 in; K - Factor8:1.59; C0 - Static Radial Rating:107000 lbf; |
| SMITH CR-3-1/2-C Cam Follower and Track Roller - Stud Type | Shaft Size:5-11/16 in; Dimension B:10.5 in; Dimension S:3.4 in; Series Type:Light Series; Note:This product line wa; Cor - Static Load Rating:149273 lbf; Dimension P:1.0 in; Dimension N:18.3 in; Support Type:Take-Up; Dimension D:16.8 in; |
| SMITH BCR-7/8-X Cam Follower and Track Roller - Stud Type | Support Type:Two-Bolt Plummer Blo; Housing Width:3.3 in; Dimension H2:5.4 in; Bearing Number:LSM40BR; Maximum Speed:5400 rpm; Bearing - Housing - Seal:LSM40BRHRSS; Dimension H1:0.9 in; Seal Type:Viton Single Lip; Bearing UPC:013992029737; Shaft Size:40 mm; |
| SMITH MYRV-10-SC Cam Follower and Track Roller - Yoke Type | D:72 mm; Minimum Buy Quantity:N/A; Internal Special Features:No; Characteristic outer ring frequency, BPF0:3.56 Hz; Outer Race Width:0.669 Inch | 17 Mill; Internal Clearance:C3-Loose; Static load, C0:15.3 kN; Precision Class:ABEC 1 | ISO P0; Noun:Bearing; |
| SMITH BCR-1-5/8-XB Cam Follower and Track Roller - Stud Type | I.D.(φ):6.6; Days to Ship:22 Days or more; RoHS:6; Material:304 Stainless Steel; Thickness T(mm):5; Surface Treatment:No; Outer Diameter D(φ):38; |
| SMITH MCR-30-S Cam Follower and Track Roller - Stud Type | Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Housing Material:[Aluminum Alloy] 201; RoHS:6; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):38; Flange Shape:Compact Type; Number of Bearings:Double; |
| SMITH BCR-1-XC Cam Follower and Track Roller - Stud Type | Housing:FSNT 526; Max Grease Speed:1700; Bearing:23226K; Shaft Diameter d:115 mm; H2:50.0 mm; Seal Type:Labyrinth; Lockwasher:MB26; A:190.00 mm; Adapter Sleeve1:H2326; Bolt Qty:4; |
| SMITH YAD-12 Cam Follower and Track Roller - Yoke Type | L(mm):3 ～ 100; L Dimension Tolerance:Negative Tolerance; I.D. d(φ):40; Application:For Inner Ring; O.D. D(φ):54; Material:Low Carbon Steel; Surface Treatment:Electroless Nickel P; Days to Ship:7 Days; RoHS:6; |
| SMITH BCR-3-XBC Cam Follower and Track Roller - Stud Type | Unit, Type:Insert Bearing Unit; Diameter series symbol:Used for Light load; Bearing Inner Dia. Shape:Tapered hole adapter; Surface Treatment:No; Fit:J7; Rolling Element Material:Bearing Steel; Basic Load Rating, Dynamic Rating(N):14000; Basic Load Rating, Static Rating(N):7850; |