| No. | Brand | J | R | F | d | t | S | r | Z |
| HR-1-7/8-C | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-B | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/4-XBE | SMITH | 92 mm | - | - | 35 mm | - | - | - | - |
| MCRV-19-B | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/2-XBC | SMITH | - | - | - | 95.250 mm | - | - | - | - |
| YAD-03 | SMITH | - | - | - | - | - | - | - | - |
| HR-1-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| HR-7/8 | SMITH | - | - | - | - | - | - | - | - |
| HR-1-1/4-B | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-XC | SMITH | - | - | - | - | - | - | - | - |
| HR-1-1/2-XB | SMITH | - | - | - | - | - | - | - | - |
| HR-1-5/8-XC | SMITH | - | - | - | - | - | - | - | - |
| NUKR-52 | SMITH | - | - | - | - | - | - | - | - |
| CR-5/8-X | SMITH | - | - | - | 60 | - | - | - | - |
| BCR-7/8-X | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-7/8 | SMITH | - | - | - | - | - | - | - | - |
| CR-2-BC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-47-SB | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-BC | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/8-XBE | SMITH | - | - | - | - | - | - | - | - |
| SMITH HR-1/2-XBC Cam Follower and Track Roller - Stud Type | Designation of bearing:EX201G2T04; Designation of housing:FCE204-; A1:8 mm; N:9mm; J:78 mm; A2:28.5 mm; C0:6.65 kN; d:12 mm; B1:43.5 mm; A:18 mm; |
| SMITH CR-2-3/4-XBE Cam Follower and Track Roller - Stud Type | Type:Ball; Outer Ring Shape:Standard; Precision:Class 0; Bearing Style:Double Shielded; d:10; D:22; Width B (or T)(mm):6; |
| SMITH MCRV-85-SB Cam Follower and Track Roller - Stud Type | Ca:12.7 kN; C1:9 mm; C2:8 mm; Dw1:3.5 mm; Nlim (oil):10,000 rpm; Weight / Kilogram:0.053; Nlim (grease):2,500 rpm; Inventory:0.0; C0r:14.4 kN; Fw:17 mm; |
| SMITH YAS-08 Cam Follower and Track Roller - Yoke Type | Bearing Material:[Steel] Steel; Flange Shape:Compact Type; Bearing I.D. d(mm):15; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; Type:Bearings with Housin; Number of Bearings:Single; Shape:Flanged Pilot Type; Seals:ZZ (Double Shield); Volume Discount:Available; |
| SMITH BYR-2-1/4-X Cam Follower and Track Roller - Yoke Type | C:31.85 kN; Designation of housing:PG209N-; C0:20.8 kN; Designation of open end cover:SCOU209-28; E:22 mm; Recommended tightening torque for set screw:8 Nm; Z:70.3 mm; T max.:100 °C; Weight:2.18 kg; Designation of bearing:UC209-28G2T04; |
| SMITH CR-3-1/2-C Cam Follower and Track Roller - Stud Type | Shaft Size:5-11/16 in; Dimension B:10.5 in; Dimension S:3.4 in; Series Type:Light Series; Note:This product line wa; Cor - Static Load Rating:149273 lbf; Dimension P:1.0 in; Dimension N:18.3 in; Support Type:Take-Up; Dimension D:16.8 in; |
| SMITH IRR-9/16 Needle Non Thrust Roller Bearings | B:65.1 mm; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; Weight:3.85 kg; A1:16 mm; A:30.5 mm; C:52.5 kN; Designation of bearing:UC212-39G2L3; C0:32.8 kN; G:R1/8"; |
| SMITH HR-1-7/8-C Cam Follower and Track Roller - Stud Type | Shape:Flange Type; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Bearing Material:Stainless Steel; Holder Surface Treatment:Not Provided; Bearing Retained:Yes (with retaining; Volume Discount:Available; Width T(mm):45; |
| SMITH HR-1-5/8-XC Cam Follower and Track Roller - Stud Type | Cg - Geometry Factor:0.0938; da - Cone Frontface Backing Diameter:2.44 in; db - Cone Backface Backing Diameter:2.48 in; C0 - Static Radial Rating:46200 lbf; R - Cone Backface To Clear Radius3:0.03 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:5090 lbf; Ab - Cage-Cone Frontface Clearance:0.07 in; Aa - Cage-Cone Backface Clearance:0.08 in; G2 - Heat Generation Factor (Rib-Roller End):16.1; |
| SMITH MCRV-26-SC Cam Follower and Track Roller - Stud Type | Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Bearing Part Number:6904; Flange O.D. H(φ):72; Number of Bearings:Double; Days to Ship:7 Days; Bearing Retained:Yes (with retaining; |
| SMITH HR-1-1/2-XB Cam Follower and Track Roller - Stud Type | Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit; Fit:J7; RoHS:6; Basic Load Rating, Dynamic Rating(N):96100; Bearing Inner Dia. Shape:Cylindrical Bore Set; Grease Type:SH33M; |
| SMITH MYR-5 Cam Follower and Track Roller - Yoke Type | S:9.5 mm; C0:15.2 kN; A:34 mm; A2:48.4 mm; Designation of housing:F207N-; N:14mm; e:19 mm; J:92 mm; B1:38.9 mm; B:25.4 mm; |
| SMITH CR-1-3/8-XBC-SS Cam Follower and Track Roller - Stud Type | C:9.55 kN; S:6.5 mm; G:M6x1; C0:4.78 kN; e:10 mm; A:20 mm; B1:28.6 mm; J:76.1 mm; Designation of housing:FTE202-; Recommended tightening torque for set screw:5.5 Nm; |
| SMITH PCR-1-1/2-E Cam Follower and Track Roller - Stud Type | Types:16**/6*** series; Size Standards:Metric System; Outer Ring Shape:Flat; Retainer Type:Punching; Max. Allowed rpm(rpm):13000; RoHS:6; Rolling Element Material:Steel; D:55; Grease symbol:/5K; Load Direction:Radial; |
SMITH YR-1-3/4-X Cam Follower and Track Roller - Yoke Type Video