| No. | Brand | J | R | F | d | t | S | r | Z |
| BCR-1-5/8-XBC | SMITH | - | - | - | 55 mm | - | 22.2 mm | - | - |
| MCR-47-SBC | SMITH | - | - | - | - | - | - | - | - |
| DYR-1-3/4 | SMITH | - | - | - | - | - | - | - | - |
| PCR-1-1/2-E | SMITH | - | - | - | - | - | - | - | - |
| YAG-60 | SMITH | - | - | 14 mm | - | 1 mm | - | - | - |
| CR-2-1/4-XB | SMITH | - | - | - | 130 mm | - | - | - | - |
| MUTD-2052 | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-XC | SMITH | - | - | - | - | - | - | - | - |
| CR-3-1/2-XC | SMITH | - | - | - | 60 mm | - | - | - | 30.5 mm |
| NUKR-85 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-13-S | SMITH | - | - | - | - | - | - | - | - |
| MCRV-72-S | SMITH | - | - | - | 50 mm | - | - | - | - |
| HR-1-3/8-XC | SMITH | - | - | 72 mm | - | - | - | - | - |
| BCR-2-B | SMITH | - | - | - | - | - | - | - | - |
| MCR-32-SBC | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/8-XB-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-9/16-XBEC | SMITH | - | - | - | - | - | - | - | - |
| BCR-3-XBC | SMITH | - | - | - | - | - | - | - | - |
| DCR-1 | SMITH | - | - | - | 85 mm | - | - | - | - |
| CR-4-X | SMITH | - | - | - | - | - | - | - | - |
| FCR-5 | SMITH | - | - | - | - | - | - | - | - |
| CR-2-XBC-SS | SMITH | 202 mm | - | - | - | - | 12 mm | - | - |
| CR-2-3/4-XBE | SMITH | - | - | - | 10 | - | - | - | - |
| MYRV-10-SC | SMITH | - | - | - | - | - | - | - | - |
| DYR-3-1/4 | SMITH | - | - | - | - | - | - | - | - |
| HR-1-XC | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-5/8-XB | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-1/8-XC | SMITH | - | 500 mm | - | - | - | - | - | - |
| SMITH NUKR-52 Cam Follower and Track Roller - Stud Type | Dimension H1:1.6 in; Dimension J:19.5 in; Shaft Size:150 mm; Cr - Dynamic Load Rating:103187 lbf; Dimension L:22.0 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Bearing - Housing - Seal:LSM150BXHHTPS; Bolt Size:4 x M24; Bearing UPC:013992028662; Maximum Speed:1450 rpm; |
| SMITH HR-2-1/2-C Cam Follower and Track Roller - Stud Type | G:M6x1; N1:31 mm; T min.:-20 °C; A2:46 mm; d:61.91 mm; L3:123 mm; C0:51.8 kN; B:71 mm; Weight:7.5 kg; N2:71 mm; |
| SMITH YAG-60 Cam Follower and Track Roller - Yoke Type | outside diameter:0.5512 in; inside diameter:0.3937 in; rs min:0.3 mm; Brand:NTN; F:14 mm; Lubrication hole on inner ring:Non/No; bore type:Round; B:12 mm; ras max:0.3 mm; t:1 mm; |
| SMITH MCRV-47-SC Cam Follower and Track Roller - Stud Type | Dimension H:5.1 in; Series Type:Medium Series; Seal Type:Viton Single Lip; Bolt Size:4 x M30; Dimension V:0.2 in; Shaft Size:6-15/16 in; Bearing - Housing - Seal:MSE615BRHRSS; Bearing Number:MSE615BR; Bearing UPC:013992033048; Note:This product line wa; |
| SMITH CR-1/2-BC-SS Cam Follower and Track Roller - Stud Type | SW:3.97 mm; A2:35 mm; A:49 mm; Designation of housing:T209-; T min.:-20 °C; N2:49 mm; Recommended tightening torque for set screw:8 Nm; A1:16 mm; N1:19 mm; Designation of bearing:EX209-26G2L4; |
| SMITH HR-1/2-XBC Cam Follower and Track Roller - Stud Type | Designation of bearing:EX201G2T04; Designation of housing:FCE204-; A1:8 mm; N:9mm; J:78 mm; A2:28.5 mm; C0:6.65 kN; d:12 mm; B1:43.5 mm; A:18 mm; |
| SMITH CR-1/2-A-XBE Cam Follower and Track Roller - Stud Type | Type:Bearings with Housin; Bearing Material:[Steel] Steel; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; Width T(mm):40 ～ 70; RoHS:6; Bearing Part Number:6201; |
| SMITH HR-1-1/2-XB Cam Follower and Track Roller - Stud Type | Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit; Fit:J7; RoHS:6; Basic Load Rating, Dynamic Rating(N):96100; Bearing Inner Dia. Shape:Cylindrical Bore Set; Grease Type:SH33M; |
| SMITH YAD-12 Cam Follower and Track Roller - Yoke Type | L(mm):3 ～ 100; L Dimension Tolerance:Negative Tolerance; I.D. d(φ):40; Application:For Inner Ring; O.D. D(φ):54; Material:Low Carbon Steel; Surface Treatment:Electroless Nickel P; Days to Ship:7 Days; RoHS:6; |
| SMITH CR-2-1/2 Cam Follower and Track Roller - Stud Type | s1:53.2 mm; d:60 mm; Weight:5.27 kg; N1:25 mm; Designation of bearing:EX212G2T04; B:61.8 mm; S:30.9 mm; L:241 mm; L1:70 mm; d1:82 mm; |
| SMITH BYR-2-1/4-X Cam Follower and Track Roller - Yoke Type | C:31.85 kN; Designation of housing:PG209N-; C0:20.8 kN; Designation of open end cover:SCOU209-28; E:22 mm; Recommended tightening torque for set screw:8 Nm; Z:70.3 mm; T max.:100 °C; Weight:2.18 kg; Designation of bearing:UC209-28G2T04; |
| SMITH YR-4-XC Cam Follower and Track Roller - Yoke Type | Shape:T-Shaped; Days to Ship:8 Days; Number of Bearings:Double; Bearing Retained:No; Height Indication:Height Selection; T(mm):20 ～ 30; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Holder Surface Treatment:Electroless Nickel P; |
| SMITH HR-2-1/2-XB Cam Follower and Track Roller - Stud Type | Size Standards:Metric System; Rolling Element Material:Steel; Raceway Ring Shape:Tapered Roller; Specifications/Environment:Standard; Number of Raceway Ring Rows:Single Row; Outer Ring Type:Flat; Load Direction:Radial / Thrust; |
| SMITH BCR-1-XC Cam Follower and Track Roller - Stud Type | Housing:FSNT 526; Max Grease Speed:1700; Bearing:23226K; Shaft Diameter d:115 mm; H2:50.0 mm; Seal Type:Labyrinth; Lockwasher:MB26; A:190.00 mm; Adapter Sleeve1:H2326; Bolt Qty:4; |
SMITH DYR-1-3/4 Cam Follower and Track Roller - Yoke Type Video