| No. | Brand | J | R | F | d | t | S | r | Z |
| CR-3-1/2-XC | SMITH | - | - | - | 60 mm | - | - | - | 30.5 mm |
| MCRV-47-SB | SMITH | - | - | - | - | - | - | - | - |
| HR-1-XC | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/8-XBE | SMITH | - | - | - | - | - | - | - | - |
| CR-3-XBEC | SMITH | - | - | - | - | - | - | - | - |
| HR-1-1/4-B | SMITH | - | - | - | - | - | - | - | - |
| FCR-5 | SMITH | - | - | - | - | - | - | - | - |
| HR-7/8 | SMITH | - | - | - | - | - | - | - | - |
| HR-1/2-XBC | SMITH | 78 mm | - | - | 12 mm | - | - | - | - |
| BCR-1-XC | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-B-SS | SMITH | - | - | - | - | - | - | - | - |
| HR-1-7/8-X | SMITH | - | - | - | - | - | - | - | - |
| CR-1-7/8-X | SMITH | - | - | - | 35 | - | - | - | - |
| CR-2-1/2 | SMITH | - | - | - | 60 mm | - | 30.9 mm | - | - |
| YR-3/4-SS | SMITH | - | - | - | - | - | - | - | - |
| MCR-52-C | SMITH | - | - | - | - | - | - | - | - |
| FCR-2-E | SMITH | - | - | - | - | - | - | - | - |
| NUKR-47 | SMITH | - | - | - | - | - | - | - | - |
| HR-2-3/4-XBC | SMITH | - | - | - | - | - | - | - | 84.5 mm |
| BCR-1-1/8-XC | SMITH | - | 500 mm | - | - | - | - | - | - |
| MYR-5 | SMITH | 92 mm | - | - | - | - | 9.5 mm | - | - |
| BCR-2-B | SMITH | - | - | - | - | - | - | - | - |
| HR-1-7/8-XB | SMITH | - | - | - | 3.7500 in | - | - | - | - |
| CR-1-3/8-XBC-SS | SMITH | 76.1 mm | - | - | - | - | 6.5 mm | - | - |
| MCRV-35-SBC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-80-S | SMITH | - | - | - | - | - | - | - | - |
| CR-7/8-BC | SMITH | - | - | - | 85 | - | - | - | - |
| MCRV-52 | SMITH | 99 mm | - | - | - | - | - | - | 42 mm |
| SMITH MCR-52-C Cam Follower and Track Roller - Stud Type | Cg - Geometry Factor:0.0577; C90 - Dynamic Radial Rating (90 million revolutions)4:2680 lbf; Design Units:Imperial; Bearing Weight:0.20 Kg; K - Factor7:1.69; Y - ISO Factor9:1.73; B - Cone Width:17.463 mm; C0 - Static Radial Rating:11300 lbf; G2 - Heat Generation Factor (Rib-Roller End):10.3; C1 - Dynamic Radial Rating (1 million revolutions)5:10300 lbf; |
| SMITH MCR-47-SBC Cam Follower and Track Roller - Stud Type | Inner/Outer Ring Material:Steel; Size Standards:Metric System; Rolling Element Material:Steel; Raceway Ring Shape:Self-aligning roller; Retainer Type:Punching; Mass(g):2300; B:43; Shaft Bore Config.:Cylindrical Bore; D:120; Internal Clearance Symbol:No; |
| SMITH BCR-1-XC Cam Follower and Track Roller - Stud Type | Housing:FSNT 526; Max Grease Speed:1700; Bearing:23226K; Shaft Diameter d:115 mm; H2:50.0 mm; Seal Type:Labyrinth; Lockwasher:MB26; A:190.00 mm; Adapter Sleeve1:H2326; Bolt Qty:4; |
| SMITH MCR-26-SBC Cam Follower and Track Roller - Stud Type | Outer Ring:With Outer Ring; Rolling Element Material:Steel; Series:No Inner Wheel; d:25; B:30; Days to Ship:6 Days or more; D:37; Specifications/Environment:Standard; Raceway Ring Shape:Needle Roller; Outer Ring Type:Flat; |
| SMITH BCR-2-B Cam Follower and Track Roller - Stud Type | Bearing Retained:No; Bearing Part Number:6201; Width T(mm):45 ～ 55; Days to Ship:7 Days; Bearing I.D. d(mm):12; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Seals:ZZ (Double Shield); Type:Bearings with Housin; |
| SMITH CR-7/8-BC Cam Follower and Track Roller - Stud Type | Bearing Unit, Type:Round flange shape; Bearing Inner Dia. Shape:Cylindrical Bore Set; Surface Treatment:No; Diameter series symbol:Used for Light load; RoHS:6; d:85; Machining:Steel plate cover mo; Unit, Type:Insert Bearing Unit; Fit:J7; Basic Load Rating, Dynamic Rating(N):84000; |
| SMITH CR-1-3/8-XB-SS Cam Follower and Track Roller - Stud Type | Rolling Element Material:Steel; Type:Angular Contact Ball; Load Direction:Radial; Specifications/Environment:Standard; D:52; Number of Raceway Ring Rows:Double Row; Max. Allowed rpm(rpm):7500; B:20.6; Grease symbol:/2AS; |
| SMITH MCRV-19-B Cam Follower and Track Roller - Stud Type | Bearing Type:Ball Bearing; Shaft Size d:0.787 in; Weight:0.50 lb; Center of Bearing from End S:8.86 mm; Outside Ring Width C:14.000 mm; Set Screw Distance S2:6.02 mm; Set Screw Size:M6x1; Inner Ring Width B:27.00 mm; Dimension S1:18.14 mm; Static Load Rating:1460 lbf; |
| SMITH BCR-2-BC Cam Follower and Track Roller - Stud Type | Unit, Type:Insert Bearing Unit; Unit Body Material:Stainless steel silv; Type of Insert Bearing:Cylindrical Bore Sha; Surface Treatment:No; Pillow Type, Category:Standard; Days to Ship:6 Days or more; Rolling Element Material:Stainless Steel; |
| SMITH MFCR-35 Cam Follower and Track Roller - Stud Type | Unit, Type:Bearing unit; Lubrication method:Oil Supply Type; Unit Body Material:Cast Iron; d:130; Bearing Unit, Type:Take-Up Type; Basic Dynamic Load Rating Cr(N):150000; Bearing Inner Dia. Shape:Cylindrical Bore Set; Days to Ship:Quote; |
| SMITH MVYR-62 Cam Follower and Track Roller - Yoke Type | Bearing Retained:Yes (with retaining; Volume Discount:Available; Height H(mm):20; Width T(mm):15; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Shape:T-Shaped; Type:Bearings with Housin; Holder Surface Treatment:Black Oxide Coating; |
| SMITH DCR-3-1/2 Cam Follower and Track Roller - Stud Type | s1:24.6 mm; T max.:200 °C; Designation of open end cover:SCO209-45; T min.:-20 °C; C:31.85 kN; A:38 mm; Z:57.7 mm; A2:40.2 mm; d:45 mm; e:10 mm; |
| SMITH MYRV-10-SC Cam Follower and Track Roller - Yoke Type | D:72 mm; Minimum Buy Quantity:N/A; Internal Special Features:No; Characteristic outer ring frequency, BPF0:3.56 Hz; Outer Race Width:0.669 Inch | 17 Mill; Internal Clearance:C3-Loose; Static load, C0:15.3 kN; Precision Class:ABEC 1 | ISO P0; Noun:Bearing; |
| SMITH YR-1-7/8 Cam Follower and Track Roller - Yoke Type | R - Cone Backface To Clear Radius3:1.020 mm; Series:32006X; DD:45.1 mm; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:4710 lbf; K - Factor8:1.36; WPD:51.4 mm; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:18200 lbf; Ab - Cage-Cone Frontface Clearance:1.8 mm; B - Cone Width:17.000 mm; d:30 mm; |
SMITH MCR-30-S Cam Follower and Track Roller - Stud Type Video
SMI MCR 30 S - SMITH BEARING | Cam Follower ... - BDI
30MM Roller Diameter; 14MM Roller Width; Crowned Roller Surface Profile; 12MM Stud Diameter; M12X1.5 Thread Size; Standard Stud Stud Profile; ...
Smith Bearing | MCR-30-S | MCR Series Metric Cam ...
Shop Smith Bearing MCR-30-S at Applied.com, which includes; Cam Follower, 30 mm OD Crowned Roller, 12 mm Standard Stud, M12 Thread, Slotted End, Sealed, ...
SMITH BEARING MCR-30-S Metric Cam Follower 30MM | eBay
|Listed in category: Business & Industrial; >; Other Business & Industrial; >; See more NOS Smith Cam Follower MCR 30 S As9100 ...
Smith Bearing MCR-30 Cam Follower Needle Roller Bearing ...
Smith Bearing MCR-30 Cam Follower Needle Roller Bearing, Single Row Stud Type, Caged Unsealed, 30 mm: Amazon.com: Industrial & Scientific.Material: Stainless Steel, PlasticPackage Dimensions: 5.1 x 1.3 x 1.3 inches; 3....Item Diameter: 30.0 millimeters$40.05 · Out of stock
MCR-30-S - Detail - Manufacturer of Smith Bearing Cam ...
(D) Roller O.D. (mm), 30 ... SMITH Bearing® Number, MCR-30-S ... Limit speed for grease lubrication: For oil lubrication speed may be increased by up to 30%.
Metric Need Bearing Cam Follower, MCR-30-S - Zoro Tools
Order Smith Bearing Metric Need Bearing Cam Follower, MCR-30-S, MCR-30-S at Zoro.com. Great prices & free shipping on orders over $50 when you sign in or ...
Smith MCR-30-S Caged Stud Type Screwdriver slot ...
The MCR-30-S is produced by Smith Bearings and is described as a Smith MCR-30-S Caged Stud Type Screwdriver slot Sealed Crowned Metric Needle Bearing Cam ...Brand: Smith BearingsWeight: 92.0 lbTypically ships in: 1 day