| No. | Brand | J | R | F | d | t | S | r | Z |
| CR-1-3/8-XBC | SMITH | - | - | - | 34.92 mm | - | - | - | - |
| CR-1-7/8-B | SMITH | - | - | - | - | - | 19 mm | - | - |
| CR-3-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| MCR-22-C | SMITH | - | - | - | 30 | - | - | - | - |
| PCR-1-3/4 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-7/8-X | SMITH | - | - | - | 35 | - | - | - | - |
| BCR-1-1/8-XC | SMITH | - | 500 mm | - | - | - | - | - | - |
| IRR-5/8 | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-7/8 | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-BC-SS | SMITH | - | - | - | - | - | - | - | - |
| FCR-2-E | SMITH | - | - | - | - | - | - | - | - |
| MCRV-19-B | SMITH | - | - | - | - | - | - | - | - |
| HR-1-1/2-XB | SMITH | - | - | - | - | - | - | - | - |
| YR-1-7/8 | SMITH | - | - | - | 30 mm | - | - | - | - |
| CR-4-X | SMITH | - | - | - | - | - | - | - | - |
| YAD-12 | SMITH | - | - | - | - | - | - | - | - |
| MYRV-10-SC | SMITH | - | - | - | - | - | - | - | - |
| HR-1-1/4-B | SMITH | - | - | - | - | - | - | - | - |
| CR-9/16-XBEC | SMITH | - | - | - | - | - | - | - | - |
| HR-1/2-XBC | SMITH | 78 mm | - | - | 12 mm | - | - | - | - |
| BCR-1-1/4-C | SMITH | - | - | - | - | - | - | - | - |
| SMITH HR-1-5/8-XC Cam Follower and Track Roller - Stud Type | Cg - Geometry Factor:0.0938; da - Cone Frontface Backing Diameter:2.44 in; db - Cone Backface Backing Diameter:2.48 in; C0 - Static Radial Rating:46200 lbf; R - Cone Backface To Clear Radius3:0.03 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:5090 lbf; Ab - Cage-Cone Frontface Clearance:0.07 in; Aa - Cage-Cone Backface Clearance:0.08 in; G2 - Heat Generation Factor (Rib-Roller End):16.1; |
| SMITH YAG-60 Cam Follower and Track Roller - Yoke Type | outside diameter:0.5512 in; inside diameter:0.3937 in; rs min:0.3 mm; Brand:NTN; F:14 mm; Lubrication hole on inner ring:Non/No; bore type:Round; B:12 mm; ras max:0.3 mm; t:1 mm; |
| SMITH MUTD-2052 Cam Follower and Track Roller - Yoke Type | Type:Bearings with Housin; Shape:L-Shaped; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Height Indication:Height Selection; Holder Surface Treatment:Not Provided; RoHS:6; Bearing Material:[Steel] Steel; |
| SMITH YR-1-7/8 Cam Follower and Track Roller - Yoke Type | R - Cone Backface To Clear Radius3:1.020 mm; Series:32006X; DD:45.1 mm; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:4710 lbf; K - Factor8:1.36; WPD:51.4 mm; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:18200 lbf; Ab - Cage-Cone Frontface Clearance:1.8 mm; B - Cone Width:17.000 mm; d:30 mm; |
| SMITH HR-1-1/2-XB Cam Follower and Track Roller - Stud Type | Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit; Fit:J7; RoHS:6; Basic Load Rating, Dynamic Rating(N):96100; Bearing Inner Dia. Shape:Cylindrical Bore Set; Grease Type:SH33M; |
| SMITH HR-1-7/8-C Cam Follower and Track Roller - Stud Type | Shape:Flange Type; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Bearing Material:Stainless Steel; Holder Surface Treatment:Not Provided; Bearing Retained:Yes (with retaining; Volume Discount:Available; Width T(mm):45; |
| SMITH CR-1-1/4-XBE Cam Follower and Track Roller - Stud Type | C:25.7 kN; s1:16 mm; J:92 mm; Weight:1.42 kg; T max.:100 °C; B:32 mm; A2:42.5 mm; Recommended tightening torque for set screw:5.5 Nm; e:19 mm; d:35 mm; |
| SMITH MCRV-72-S Cam Follower and Track Roller - Stud Type | Designation of bearing:ES210G2; N:M16; H:57.2 mm; d:50 mm; T min.:-20 °C; T max.:100 °C; B1:43.7 mm; G:R1/8"; L1:33.5 mm; d1:67.2 mm; |
| SMITH CR-5/8-A-XC Cam Follower and Track Roller - Stud Type | H1:15 mm; L:150 mm; Designation of housing:PA212-; N:M16; L1:52 mm; C:52.5 kN; G:M6x1; C0:32.8 kN; E:25 mm; T max.:200 °C; |
| SMITH CR-1-BC Cam Follower and Track Roller - Stud Type | e:19.2 mm; B:30.2 mm; C:31.85 kN; J:160 mm; d1:62 mm; A2:51.9 mm; s1:33.4 mm; H:150 mm; Designation of bearing:ES209G2T20; H1:55 mm; |
| SMITH MCRV-19-B Cam Follower and Track Roller - Stud Type | Bearing Type:Ball Bearing; Shaft Size d:0.787 in; Weight:0.50 lb; Center of Bearing from End S:8.86 mm; Outside Ring Width C:14.000 mm; Set Screw Distance S2:6.02 mm; Set Screw Size:M6x1; Inner Ring Width B:27.00 mm; Dimension S1:18.14 mm; Static Load Rating:1460 lbf; |
| SMITH HR-1-7/8-XB Cam Follower and Track Roller - Stud Type | Cg - Geometry Factor:0.102; Design Units:Imperial; Series:77000; d:3.7500 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:34500 lbf; C90 - Dynamic Radial Rating (90 million revolutions)5:19800 lbf; Cage Type:Stamped Steel; a - Effective Center Location4:-0.38 in; K - Factor8:1.59; C0 - Static Radial Rating:107000 lbf; |
| SMITH HR-1/2-C Cam Follower and Track Roller - Stud Type | Product Group:B04144; F:204 mm; Category:Bearings; Brand:NTN; Da max:324 mm; Characteristic inner ring frequency, BPFI:8.33 Hz; Characteristic outer ring frequency, BPF0:5.67 Hz; Minimum Buy Quantity:N/A; E:300 mm; B:68 mm; |
| SMITH MCRV-47-SB Cam Follower and Track Roller - Stud Type | Seals:ZZ (Double Shield); Flange Shape:Square Type; Volume Discount:Available; Number of Bearings:Double; Days to Ship:7 Days; Flange O.D. H(φ):48; Type:Bearings with Housin; RoHS:6; Bearing Part Number:6901; |
SMITH MUTD-1747 Cam Follower and Track Roller - Yoke Type Video