| SMITH BCR-1-7/8 Cam Follower and Track Roller - Stud Type | Shaft Size :2-15/16 in; Shaft Tolerance:0.0020 in; Locking Style:Eccentric; Full Timken Part Number:QMSN15J215SB; Dimension G:2.990 in; C0 - Static Load:54100 lb; Dimension A:3.74 in; Dimension R:0.24 in; Eng Internal Radial Clearance - Min:0.0020; Oil Lubrication - T Seal:2900 rpm; |
| SMITH MCRV-47-B Cam Follower and Track Roller - Stud Type | A:48 mm; Weight:1.68 kg; L1:35 mm; G:M6x1; A1:27 mm; Recommended tightening torque for set screw:8 Nm; d1:51.1 mm; E:22 mm; Designation of housing:PG207-; S:18.8 mm; |
| SMITH HR-1-3/8-XC Cam Follower and Track Roller - Stud Type | Nlim (grease):5,800 rpm; F:72 mm; Da max:102 mm; Brand:NTN; rs min:1.5 mm; Mass (without HJ ring):0.82 kg; r1s min:1.5 mm; Nlim (oil):6,800 rpm; Dynamic load, C:97.5 kN; Static load, C0:107 kN; |
| SMITH CR-1-1/8-XBE Cam Follower and Track Roller - Stud Type | Width T(mm):40 ～ 70; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):15; Type:Bearings with Housin; Shape:Flanged Pilot Type; Days to Ship:7 Days; Housing Material:1045 Carbon Steel; |
| SMITH YR-1-7/8 Cam Follower and Track Roller - Yoke Type | R - Cone Backface To Clear Radius3:1.020 mm; Series:32006X; DD:45.1 mm; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:4710 lbf; K - Factor8:1.36; WPD:51.4 mm; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:18200 lbf; Ab - Cage-Cone Frontface Clearance:1.8 mm; B - Cone Width:17.000 mm; d:30 mm; |
| SMITH CR-1-3/8-XBC-SS Cam Follower and Track Roller - Stud Type | C:9.55 kN; S:6.5 mm; G:M6x1; C0:4.78 kN; e:10 mm; A:20 mm; B1:28.6 mm; J:76.1 mm; Designation of housing:FTE202-; Recommended tightening torque for set screw:5.5 Nm; |
| SMITH CR-1-BC Cam Follower and Track Roller - Stud Type | e:19.2 mm; B:30.2 mm; C:31.85 kN; J:160 mm; d1:62 mm; A2:51.9 mm; s1:33.4 mm; H:150 mm; Designation of bearing:ES209G2T20; H1:55 mm; |
| SMITH YR-3/4-SS Cam Follower and Track Roller - Yoke Type | Days to Ship:14 Days; Bearing Retained:No; Housing Material:1045 Carbon Steel; Holder Surface Treatment:Electroless Nickel P; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Holder Width(inch):1-1/2; Number of Bearings:Double; RoHS:6; |
| SMITH MCR-32-B Cam Follower and Track Roller - Stud Type | Thread Length F(mm):14; Surface Treatment:Black Oxide Coating; Roller Lining:None; Days to Ship:6 Days; L(mm):34; Shaft:None; Material:[Carbon Steel] 1045; Volume Discount:Available; D(φ):6; |
| SMITH NUKR-52 Cam Follower and Track Roller - Stud Type | Dimension H1:1.6 in; Dimension J:19.5 in; Shaft Size:150 mm; Cr - Dynamic Load Rating:103187 lbf; Dimension L:22.0 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Bearing - Housing - Seal:LSM150BXHHTPS; Bolt Size:4 x M24; Bearing UPC:013992028662; Maximum Speed:1450 rpm; |
| SMITH BCR-1-B Cam Follower and Track Roller - Stud Type | High-Speed Steel:Standard; Number of Raceway Ring Rows:Single Row; Inner/Outer Ring Material:Steel; Combination of two pieces:Standard; D:150; Specifications:Standard; Raceway Ring Shape:Cylindrical Roller; Cylinder shape (suffix symbol: X):No; Symbol of Bearing Ring Shape:No symbol: Internal; Outer ring oil hole:Standard; |
| SMITH BCR-1-1/4-C Cam Follower and Track Roller - Stud Type | Cone Part Number:HM265049DW; Design Units:Imperial; C - Cup Width:3.1250 in; Db - Cup Backface Backing Diameter:19.17 in; Cup Part Number:HM265010; T - Bearing Width across Cups:7.3124 in; Aa - Cage-Cone Backface Clearance:0 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:75400 lbf; B - Double Cone Width:7.3125 in; Cage Type:Pin-Type; |
| SMITH MCR-47-SBC Cam Follower and Track Roller - Stud Type | Inner/Outer Ring Material:Steel; Size Standards:Metric System; Rolling Element Material:Steel; Raceway Ring Shape:Self-aligning roller; Retainer Type:Punching; Mass(g):2300; B:43; Shaft Bore Config.:Cylindrical Bore; D:120; Internal Clearance Symbol:No; |
| SMITH HR-2-3/4-XBC Cam Follower and Track Roller - Stud Type | B1:43.7 mm; Recommended tightening torque for set screw:11.5 Nm; T min.:-40 °C; A:48 mm; Z:84.5 mm; L1:54.5 mm; L:192 mm; B:30.2 mm; T max.:100 °C; Dz:95 mm; |