| SMITH MCR-80-SB Cam Follower and Track Roller - Stud Type | Characteristic inner ring frequency, BPFI:4.91 Hz; Brand:NTN; ra max:2.5 mm; Da max:167 mm; rs min:3 mm; da min:98 mm; d:85 mm; Characteristic outer ring frequency, BPF0:3.09 Hz; Characteristic cage frequency, FTF:0.39 Hz; Mass:4.23 kg; |
| SMITH MCR-26-S Cam Follower and Track Roller - Stud Type | Dimension H :3-1/2 in; Dimension L :12-19/32 in; Cr - Dynamic Load Rating:31041 lbf; Dimension J2 :9-7/8 in; Bearing UPC:013992026149; Dimension M :3-1/2 in; Bearing Number:LSE300BR; Seal Type:Kevlar Packing Seal; Bolt Size:2 x 3/4; Series Type:Light Series; |
| SMITH CR-1-1/4-XBE Cam Follower and Track Roller - Stud Type | C:25.7 kN; s1:16 mm; J:92 mm; Weight:1.42 kg; T max.:100 °C; B:32 mm; A2:42.5 mm; Recommended tightening torque for set screw:5.5 Nm; e:19 mm; d:35 mm; |
| SMITH BCR-3-XBC Cam Follower and Track Roller - Stud Type | Unit, Type:Insert Bearing Unit; Diameter series symbol:Used for Light load; Bearing Inner Dia. Shape:Tapered hole adapter; Surface Treatment:No; Fit:J7; Rolling Element Material:Bearing Steel; Basic Load Rating, Dynamic Rating(N):14000; Basic Load Rating, Static Rating(N):7850; |
| SMITH MCR-52-C Cam Follower and Track Roller - Stud Type | Cg - Geometry Factor:0.0577; C90 - Dynamic Radial Rating (90 million revolutions)4:2680 lbf; Design Units:Imperial; Bearing Weight:0.20 Kg; K - Factor7:1.69; Y - ISO Factor9:1.73; B - Cone Width:17.463 mm; C0 - Static Radial Rating:11300 lbf; G2 - Heat Generation Factor (Rib-Roller End):10.3; C1 - Dynamic Radial Rating (1 million revolutions)5:10300 lbf; |
| SMITH MCR-22-C Cam Follower and Track Roller - Stud Type | Rolling Element Material:Steel; Load Direction:Radial; Contact angle symbol:C; Outer Ring Shape:Flat; Accuracy Symbol:P4; d:30; Basic Dynamic Load Rating(N):8600; B:9; Bearing Style:Open Type; RoHS:6; |
| SMITH HR-2-3/4-XBC Cam Follower and Track Roller - Stud Type | B1:43.7 mm; Recommended tightening torque for set screw:11.5 Nm; T min.:-40 °C; A:48 mm; Z:84.5 mm; L1:54.5 mm; L:192 mm; B:30.2 mm; T max.:100 °C; Dz:95 mm; |
| SMITH MCR-30-S Cam Follower and Track Roller - Stud Type | Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Housing Material:[Aluminum Alloy] 201; RoHS:6; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):38; Flange Shape:Compact Type; Number of Bearings:Double; |
| SMITH BCR-5/8-X Cam Follower and Track Roller - Stud Type | Bearing Type:Split Cylindrical Re; Pillow/Plummer Block Style:Split Cylindrical Ho; Shaft Size:3 in; Cor - Static Load Rating:36194 lbf; Note:This product line wa; Bearing Number:LSE300BR; Cr - Dynamic Load Rating:31024 lbf; Dimension J:260 mm; Bolt Size:2 x M20; Dimension H2:208 mm; |
| SMITH YAT-08 Cam Follower and Track Roller - Yoke Type | S:42 mm; L3:200 mm; A:120 mm; Weight:30.6 kg; Designation of bearing:UC320G2L3; A2:75 mm; H2:175 mm; B:108 mm; N2:115 mm; G:M10x1; |
| SMITH CR-7/8-BC Cam Follower and Track Roller - Stud Type | Bearing Unit, Type:Round flange shape; Bearing Inner Dia. Shape:Cylindrical Bore Set; Surface Treatment:No; Diameter series symbol:Used for Light load; RoHS:6; d:85; Machining:Steel plate cover mo; Unit, Type:Insert Bearing Unit; Fit:J7; Basic Load Rating, Dynamic Rating(N):84000; |
| SMITH CR-1-BC Cam Follower and Track Roller - Stud Type | e:19.2 mm; B:30.2 mm; C:31.85 kN; J:160 mm; d1:62 mm; A2:51.9 mm; s1:33.4 mm; H:150 mm; Designation of bearing:ES209G2T20; H1:55 mm; |
| SMITH MUTD-1747 Cam Follower and Track Roller - Yoke Type | Types:No; Torque Symbol:No; Combination symbol:No; Type:Ball; Bearing Style:Double Shielded; Low Torque Specification:No; RoHS:6; Outer Ring:With Outer Ring; Basic Load Rating, Static Rating(N):169000; |
| SMITH YAG-60 Cam Follower and Track Roller - Yoke Type | outside diameter:0.5512 in; inside diameter:0.3937 in; rs min:0.3 mm; Brand:NTN; F:14 mm; Lubrication hole on inner ring:Non/No; bore type:Round; B:12 mm; ras max:0.3 mm; t:1 mm; |