| SMITH CR-1-7/8-C Cam Follower and Track Roller - Stud Type | rs min:2.1 mm; Number of lubrication holes:3; db min:210 mm; Min operating temperature, Tmin:-40 °C; Characteristic outer ring frequency, BPF0:10.6 Hz; Y1:2.95; da min:210.2 mm; Mass:21.9 kg; e:0.23; Characteristic inner ring frequency, BPFI:13.4 Hz; |
| SMITH CR-1-1/2 Cam Follower and Track Roller - Stud Type | L Dimension Tolerance:+0.000/-0.005; L(inch):0.125 ～ 2; Days to Ship:8 Days; RoHS:6; |
| SMITH HR-1-3/4-C Cam Follower and Track Roller - Stud Type | RoHS:6; Preload Mark:No; Outer Ring:With Outer Ring; Load Direction:Radial; Outer Ring Shape:Flat; I.D.(Ø):50; Symbol of Bearing Ring Shape:No; Bearing Style:Open Type; Type symbol:No; Precision Grade Symbol:No; |
| SMITH MCR-47-SBC Cam Follower and Track Roller - Stud Type | Inner/Outer Ring Material:Steel; Size Standards:Metric System; Rolling Element Material:Steel; Raceway Ring Shape:Self-aligning roller; Retainer Type:Punching; Mass(g):2300; B:43; Shaft Bore Config.:Cylindrical Bore; D:120; Internal Clearance Symbol:No; |
| SMITH BCR-1-1/4-C Cam Follower and Track Roller - Stud Type | Cone Part Number:HM265049DW; Design Units:Imperial; C - Cup Width:3.1250 in; Db - Cup Backface Backing Diameter:19.17 in; Cup Part Number:HM265010; T - Bearing Width across Cups:7.3124 in; Aa - Cage-Cone Backface Clearance:0 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:75400 lbf; B - Double Cone Width:7.3125 in; Cage Type:Pin-Type; |
| SMITH FCR-2-E Cam Follower and Track Roller - Stud Type | Stroke:No; Seal:Triple seals; Machining:No; Fit:J7; RoHS:6; Bearing Unit, Type:Diamond Flange Shape; Basic Load Rating, Dynamic Rating(N):34100; Accessory:No Cover; |
| SMITH CR-1/2-B-SS Cam Follower and Track Roller - Stud Type | Shape:Flange Type; Flange Shape:Compact Type; RoHS:6; Housing Material:1045 Carbon Steel; Bearing Material:[Steel] Steel; Flange O.D. H(φ):45; Days to Ship:7 Days; Number of Bearings:Single; Width T(mm):11; Seals:VV (Non-Contact Rubb; |
| SMITH CR-2-1/2-XBC Cam Follower and Track Roller - Stud Type | G1 - Heat Generation Factor (Roller-Raceway):306; Aa - Cage-Cone Backface Clearance:5.1 mm; db - Cone Backface Backing Diameter:119.89 mm; Da - Cup Frontface Backing Diameter:187.96 mm; e - ISO Factor8:0.32; R - Cone Backface To Clear Radius1:3.300 mm; d:95.250 mm; Cage Type:Stamped Steel; C0 - Static Radial Rating:204000 lbf; Series:EH220700; |
| SMITH CR-1-1/2-XBC Cam Follower and Track Roller - Stud Type | B:50.800 mm; Aa - Cage-Cone Backface Clearance:4.6 mm; B - Cone Width:50.8 mm; Cup Part Number:L357010; Cone Part Number:L357040; Da - Cup Frontface Backing Diameter:380.00 mm; Cage Type:Stamped Steel; Cg - Geometry Factor:0.158; C1 - Dynamic Radial Rating (1 million revolutions)5:132000 lbf; a - Effective Center Location3:12.7 mm; |
| SMITH HR-1-7/8-XB Cam Follower and Track Roller - Stud Type | Cg - Geometry Factor:0.102; Design Units:Imperial; Series:77000; d:3.7500 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:34500 lbf; C90 - Dynamic Radial Rating (90 million revolutions)5:19800 lbf; Cage Type:Stamped Steel; a - Effective Center Location4:-0.38 in; K - Factor8:1.59; C0 - Static Radial Rating:107000 lbf; |
| SMITH YR-4-XC Cam Follower and Track Roller - Yoke Type | Shape:T-Shaped; Days to Ship:8 Days; Number of Bearings:Double; Bearing Retained:No; Height Indication:Height Selection; T(mm):20 ～ 30; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Holder Surface Treatment:Electroless Nickel P; |
| SMITH YR-3/4-SS Cam Follower and Track Roller - Yoke Type | Days to Ship:14 Days; Bearing Retained:No; Housing Material:1045 Carbon Steel; Holder Surface Treatment:Electroless Nickel P; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Holder Width(inch):1-1/2; Number of Bearings:Double; RoHS:6; |
| SMITH BCR-2-BC Cam Follower and Track Roller - Stud Type | Unit, Type:Insert Bearing Unit; Unit Body Material:Stainless steel silv; Type of Insert Bearing:Cylindrical Bore Sha; Surface Treatment:No; Pillow Type, Category:Standard; Days to Ship:6 Days or more; Rolling Element Material:Stainless Steel; |
| SMITH BCR-1-7/8 Cam Follower and Track Roller - Stud Type | Shaft Size :2-15/16 in; Shaft Tolerance:0.0020 in; Locking Style:Eccentric; Full Timken Part Number:QMSN15J215SB; Dimension G:2.990 in; C0 - Static Load:54100 lb; Dimension A:3.74 in; Dimension R:0.24 in; Eng Internal Radial Clearance - Min:0.0020; Oil Lubrication - T Seal:2900 rpm; |