| No. | Brand | J | R | F | d | t | S | r | Z |
| CR-3/4-B-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-3-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| CR-5/8-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-A-XBE | SMITH | - | - | - | - | - | - | - | - |
| MCR-47-C | SMITH | - | - | - | 80 | - | - | - | - |
| MCRV-47-B | SMITH | - | - | - | - | - | 18.8 mm | - | - |
| MFCR-35 | SMITH | - | - | - | 130 | - | - | - | - |
| HR-4-X | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/4-XBE | SMITH | 92 mm | - | - | 35 mm | - | - | - | - |
| MCR-22-C | SMITH | - | - | - | 30 | - | - | - | - |
| YR-3/4-SS | SMITH | - | - | - | - | - | - | - | - |
| HR-2 | SMITH | 117 mm | - | - | - | - | 15.9 mm | - | 44.4 mm |
| BYR-1-3/8-XC | SMITH | - | - | - | 20 | - | - | - | - |
| CR-1/2-BC-SS | SMITH | - | - | - | - | - | - | - | - |
| MVYR-62 | SMITH | - | - | - | - | - | - | - | - |
| IRR-9/16 | SMITH | - | - | - | - | - | - | - | - |
| BCR-7/8-X | SMITH | - | - | - | - | - | - | - | - |
| DCR-1 | SMITH | - | - | - | 85 mm | - | - | - | - |
| CR-1-7/8-C | SMITH | - | - | - | - | - | - | - | - |
| HR-2-1/2-C | SMITH | - | - | - | 61.91 mm | - | - | - | - |
| MUTD-2052 | SMITH | - | - | - | - | - | - | - | - |
| SMITH BCR-2-B Cam Follower and Track Roller - Stud Type | Bearing Retained:No; Bearing Part Number:6201; Width T(mm):45 ～ 55; Days to Ship:7 Days; Bearing I.D. d(mm):12; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Seals:ZZ (Double Shield); Type:Bearings with Housin; |
| SMITH MCR-47-SBC Cam Follower and Track Roller - Stud Type | Inner/Outer Ring Material:Steel; Size Standards:Metric System; Rolling Element Material:Steel; Raceway Ring Shape:Self-aligning roller; Retainer Type:Punching; Mass(g):2300; B:43; Shaft Bore Config.:Cylindrical Bore; D:120; Internal Clearance Symbol:No; |
| SMITH MCRV-47-SB Cam Follower and Track Roller - Stud Type | Seals:ZZ (Double Shield); Flange Shape:Square Type; Volume Discount:Available; Number of Bearings:Double; Days to Ship:7 Days; Flange O.D. H(φ):48; Type:Bearings with Housin; RoHS:6; Bearing Part Number:6901; |
| SMITH YR-1-3/4-X Cam Follower and Track Roller - Yoke Type | Bearing Material:Steel; Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; Seals:ZZ (Double Shield); Volume Discount:Available; Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; |
| SMITH CR-1-1/2 Cam Follower and Track Roller - Stud Type | L Dimension Tolerance:+0.000/-0.005; L(inch):0.125 ～ 2; Days to Ship:8 Days; RoHS:6; |
| SMITH HR-1-5/8-XC Cam Follower and Track Roller - Stud Type | Cg - Geometry Factor:0.0938; da - Cone Frontface Backing Diameter:2.44 in; db - Cone Backface Backing Diameter:2.48 in; C0 - Static Radial Rating:46200 lbf; R - Cone Backface To Clear Radius3:0.03 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:5090 lbf; Ab - Cage-Cone Frontface Clearance:0.07 in; Aa - Cage-Cone Backface Clearance:0.08 in; G2 - Heat Generation Factor (Rib-Roller End):16.1; |
| SMITH BCR-1-5/8-XBC Cam Follower and Track Roller - Stud Type | Designation of housing:FC211-; d:55 mm; e:13 mm; A1:13 mm; C0:29.2 kN; B:55.6 mm; S:22.2 mm; G:M6x1; s1:27.8 mm; T min.:-40 °C; |
| SMITH HR-2-1/2-C Cam Follower and Track Roller - Stud Type | G:M6x1; N1:31 mm; T min.:-20 °C; A2:46 mm; d:61.91 mm; L3:123 mm; C0:51.8 kN; B:71 mm; Weight:7.5 kg; N2:71 mm; |
| SMITH HR-2-3/4-XBC Cam Follower and Track Roller - Stud Type | B1:43.7 mm; Recommended tightening torque for set screw:11.5 Nm; T min.:-40 °C; A:48 mm; Z:84.5 mm; L1:54.5 mm; L:192 mm; B:30.2 mm; T max.:100 °C; Dz:95 mm; |
| SMITH BYR-1-1/4-XC Cam Follower and Track Roller - Yoke Type | Basic Load Rating, Dynamic Rating(N):34100; Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel; Stroke:No; Pillow Type, Category:Standard; Accessory:No Cover; Surface Treatment:No; Fit:J7; Days to Ship:10 Days; |
| SMITH HR-2-1/2-XB Cam Follower and Track Roller - Stud Type | Size Standards:Metric System; Rolling Element Material:Steel; Raceway Ring Shape:Tapered Roller; Specifications/Environment:Standard; Number of Raceway Ring Rows:Single Row; Outer Ring Type:Flat; Load Direction:Radial / Thrust; |
| SMITH CR-2-XBC-SS Cam Follower and Track Roller - Stud Type | A1:20 mm; T min.:-20 °C; T max.:100 °C; A2:66.3 mm; J1:92 mm; S:12 mm; C:52.5 kN; C0:32.8 kN; L:140 mm; J:202 mm; |
| SMITH HR-3-B Cam Follower and Track Roller - Stud Type | Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Bearing Material:Steel; Number of Bearings:Double; Housing Material:[Aluminum Alloy] 201; Seals:ZZ (Double Shield); Shape:Flange Type; Holder Width(inch):2; |
| SMITH MVYR-200 Cam Follower and Track Roller - Yoke Type | Precision Grade Symbol:No; Rolling Element Material:[Steel] Steel; Low Torque Specification:No; Outer Ring:With Outer Ring; Torque Symbol:No; O.D.(Ø):62; Combination symbol:No; Number of Raceway Ring Rows:Single Row; Types:No; |
SMITH CR-2-3/4-XBE Cam Follower and Track Roller - Stud Type Video