| No. | Brand | J | R | F | d | t | S | r | Z |
| CR-1-BC | SMITH | 160 mm | - | - | - | - | - | - | - |
| YR-1-3/8-SS | SMITH | - | - | - | - | - | - | - | - |
| BCR-5/8-X | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-B | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-A-XBE | SMITH | - | - | - | - | - | - | - | - |
| MFCR-35 | SMITH | - | - | - | 130 | - | - | - | - |
| YR-1-7/8 | SMITH | - | - | - | 30 mm | - | - | - | - |
| HR-1-5/8-XC | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-BC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-47-SC | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/2 | SMITH | - | - | - | - | - | - | - | - |
| HR-2-1/2 | SMITH | - | - | - | - | - | - | - | - |
| FCR-4 | SMITH | 70 mm | - | - | 23.81 mm | - | - | - | - |
| CR-3-XBEC | SMITH | - | - | - | - | - | - | - | - |
| MFYR-100 | SMITH | - | - | - | - | - | - | - | - |
| FCR-5 | SMITH | - | - | - | - | - | - | - | - |
| MCR-52-C | SMITH | - | - | - | - | - | - | - | - |
| PCR-1-1/2 | SMITH | - | - | - | 45 | - | - | - | - |
| CR-1-7/8-SS | SMITH | - | - | - | 25.4 mm | - | - | - | - |
| MUTD-1747 | SMITH | - | - | - | - | - | - | - | - |
| HR-2-XC | SMITH | - | - | - | - | - | - | - | - |
| HR-3-B | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-5/8-XBC | SMITH | - | - | - | 55 mm | - | 22.2 mm | - | - |
| PCR-1-3/4 | SMITH | - | - | - | - | - | - | - | - |
| CR-2-BC | SMITH | - | - | - | - | - | - | - | - |
| MCR-32-B | SMITH | - | - | - | - | - | - | - | - |
| MCRV-13-S | SMITH | - | - | - | - | - | - | - | - |
| CR-2-XBC-SS | SMITH | 202 mm | - | - | - | - | 12 mm | - | - |
| YR-3/4-SS | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/8-XB-SS | SMITH | - | - | - | - | - | - | - | - |
| SMITH MVYR-100 Cam Follower and Track Roller - Yoke Type | H2:83 mm; L:144 mm; A2:35 mm; P:300 mm; SW:3.97 mm; A1:16 mm; L1:87 mm; A:49 mm; s1:24.6 mm; T max.:100 °C; |
| SMITH MCR-52-C Cam Follower and Track Roller - Stud Type | Cg - Geometry Factor:0.0577; C90 - Dynamic Radial Rating (90 million revolutions)4:2680 lbf; Design Units:Imperial; Bearing Weight:0.20 Kg; K - Factor7:1.69; Y - ISO Factor9:1.73; B - Cone Width:17.463 mm; C0 - Static Radial Rating:11300 lbf; G2 - Heat Generation Factor (Rib-Roller End):10.3; C1 - Dynamic Radial Rating (1 million revolutions)5:10300 lbf; |
| SMITH NUKR-47 Cam Follower and Track Roller - Stud Type | Diameter series symbol:For Heavy Load; Stroke:No; Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Tapered hole adapter; Accessory:With cast iron cover; RoHS:6; Machining:No; |
| SMITH MCR-26-SBC Cam Follower and Track Roller - Stud Type | Outer Ring:With Outer Ring; Rolling Element Material:Steel; Series:No Inner Wheel; d:25; B:30; Days to Ship:6 Days or more; D:37; Specifications/Environment:Standard; Raceway Ring Shape:Needle Roller; Outer Ring Type:Flat; |
| SMITH YR-1-3/8-SS Cam Follower and Track Roller - Yoke Type | ra max:1 mm; Static load, C0:31 kN; Radial clearance class:C3; Nlim (grease):3,600 rpm; D:110 mm; rs min:1.1 mm; B:20 mm; Min operating temperature, Tmin:-25 °C; Dynamic load, C:38 kN; da min:76.5 mm; |
| SMITH CR-1-3/8-XBC-SS Cam Follower and Track Roller - Stud Type | C:9.55 kN; S:6.5 mm; G:M6x1; C0:4.78 kN; e:10 mm; A:20 mm; B1:28.6 mm; J:76.1 mm; Designation of housing:FTE202-; Recommended tightening torque for set screw:5.5 Nm; |
| SMITH BCR-1-7/8 Cam Follower and Track Roller - Stud Type | Shaft Size :2-15/16 in; Shaft Tolerance:0.0020 in; Locking Style:Eccentric; Full Timken Part Number:QMSN15J215SB; Dimension G:2.990 in; C0 - Static Load:54100 lb; Dimension A:3.74 in; Dimension R:0.24 in; Eng Internal Radial Clearance - Min:0.0020; Oil Lubrication - T Seal:2900 rpm; |
| SMITH MCR-13-SC Cam Follower and Track Roller - Stud Type | f0:13.2; Db min:141.5 mm; Characteristic outer ring frequency, BPF0:3.07 Hz; rs min:2.1 mm; b min:3.1 mm; B:31 mm; rNa max:0.5 mm; Brand:SNR; D3 max:125.22 mm; da min:71 mm; |
| SMITH CR-3-1/2-XC Cam Follower and Track Roller - Stud Type | s1:53.2 mm; Z:30.5 mm; C:52.5 kN; L1:32 mm; B:61.8 mm; d:60 mm; C0:32.8 kN; Designation of bearing:EX212G2; E:20 mm; B1:77.7 mm; |
| SMITH FCR-5 Cam Follower and Track Roller - Stud Type | Recommended tightening torque for set screw:8 Nm; A:32 mm; G:M6x1; d1:50 mm; A2:50.5 mm; T max.:100 °C; T min.:-20 °C; C:27 kN; Weight:1.71 kg; B1:50 mm; |
| SMITH CR-2-1/4-XB Cam Follower and Track Roller - Stud Type | a:570 mm; l1:269 mm; h1:345 mm; d1:136 mm; d:130 mm; n:90 mm; b:175 mm; g:77 mm; l:180 mm; housing weight:87 kg; |
| SMITH MFCR-35 Cam Follower and Track Roller - Stud Type | Unit, Type:Bearing unit; Lubrication method:Oil Supply Type; Unit Body Material:Cast Iron; d:130; Bearing Unit, Type:Take-Up Type; Basic Dynamic Load Rating Cr(N):150000; Bearing Inner Dia. Shape:Cylindrical Bore Set; Days to Ship:Quote; |
| SMITH PCR-1-1/2 Cam Follower and Track Roller - Stud Type | Types:Bearing for the main; Size Standards:Metric System; d:45; Accuracy Symbol:P5; Inner/Outer Ring Material:Steel; B:38; D:85; Combination symbol:DB; Combination of Angular Contact Ball Bearings:Back Combination; Bearing Style:Open Type; |
| SMITH BCR-1-1/4-C Cam Follower and Track Roller - Stud Type | Cone Part Number:HM265049DW; Design Units:Imperial; C - Cup Width:3.1250 in; Db - Cup Backface Backing Diameter:19.17 in; Cup Part Number:HM265010; T - Bearing Width across Cups:7.3124 in; Aa - Cage-Cone Backface Clearance:0 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:75400 lbf; B - Double Cone Width:7.3125 in; Cage Type:Pin-Type; |
SMITH CR-3-1/2-C Cam Follower and Track Roller - Stud Type Video