No. | Brand | J | R | F | d | t | S | r | Z |
HR-3-1/4-B | SMITH | - | - | - | - | - | - | - | - |
YR-6-X | SMITH | - | - | - | - | - | - | - | - |
HR-1-1/4-B | SMITH | - | - | - | - | - | - | - | - |
YAD-03 | SMITH | - | - | - | - | - | - | - | - |
MCR-32-SBC | SMITH | - | - | - | - | - | - | - | - |
CR-11/16-B | SMITH | - | - | - | - | - | - | - | - |
MCR-32-B | SMITH | - | - | - | - | - | - | - | - |
FCR-2-E | SMITH | - | - | - | - | - | - | - | - |
CR-4-X | SMITH | - | - | - | - | - | - | - | - |
MCR-80-SB | SMITH | - | - | - | 85 mm | - | - | - | - |
MCR-40-SC | SMITH | - | - | - | - | - | 7.5 mm | - | 48.2 mm |
HR-1-3/8-XC | SMITH | - | - | 72 mm | - | - | - | - | - |
CR-1-3/8-XB | SMITH | - | - | - | - | - | 25.4 mm | - | - |
MVYR-200 | SMITH | - | - | - | - | - | - | - | - |
BCR-1-5/8-XB | SMITH | - | - | - | - | - | - | - | - |
CR-1-7/8-SS | SMITH | - | - | - | 25.4 mm | - | - | - | - |
BCR-5/8-C | SMITH | - | - | - | - | - | - | - | - |
BYR-2-1/4-X | SMITH | - | - | - | - | - | - | - | 70.3 mm |
MYRV-25 | SMITH | - | - | - | - | - | - | - | - |
CR-1-1/8-XBE | SMITH | - | - | - | - | - | - | - | - |
HR-2-1/2-C | SMITH | - | - | - | 61.91 mm | - | - | - | - |
MCR-26-SBC | SMITH | - | - | - | 25 | - | - | - | - |
MCRV-72-S | SMITH | - | - | - | 50 mm | - | - | - | - |
MCRV-85-SB | SMITH | - | - | - | - | - | - | - | - |
BYR-1-3/8-XC | SMITH | - | - | - | 20 | - | - | - | - |
SMITH MCR-32-SBC Cam Follower and Track Roller - Stud Type | UPC Code:0883450081429; Dimension C:3.62 in; Housing Style:Two-Bolt Pillow Bloc; Y1 - Geometry Factor:2.79; Grease Lubrication - T Seal:2800 rpm; Dimension K:1.24 in; Y2 - Geometry Factor:4.15; Shaft Tolerance:0.0015 in; Dimension M:2.13 in; Engineering Group:Mounted Bearing; |
SMITH MCR-47-SBC Cam Follower and Track Roller - Stud Type | Inner/Outer Ring Material:Steel; Size Standards:Metric System; Rolling Element Material:Steel; Raceway Ring Shape:Self-aligning roller; Retainer Type:Punching; Mass(g):2300; B:43; Shaft Bore Config.:Cylindrical Bore; D:120; Internal Clearance Symbol:No; |
SMITH DYR-3-1/4 Cam Follower and Track Roller - Yoke Type | Inner Race Width:0 Inch | 0 Millimete; Harmonized Tariff Code:8482.10.50.68; Keyword String:Ball; Long Description:80MM Bore; 140MM Out; Enclosure:Open; Brand:NTN; Characteristic rolling element frequency, BSF:5.6 Hz; Characteristic inner ring frequency, BPFI:5.87 Hz; Outside Diameter:5.512 Inch | 140 Mil; |
SMITH BCR-1-1/8-XC Cam Follower and Track Roller - Stud Type | Minimum Buy Quantity:N/A; Precision class:P0; Characteristic rolling element frequency, BSF:6.23 Hz; Lw:9 mm; C:28 mm; R:500 mm; C0r:72.5 kN; Brand:NTN; Radial clearance class:CN; Characteristic outer ring frequency, BPF0:8.43 Hz; |
SMITH MCRV-40-S Cam Follower and Track Roller - Stud Type | L Dimension Tolerance:+0.000/-0.005; L(inch):0.125 ~ 2; RoHS:6; Material:Low Carbon Steel; Days to Ship:8 Days; D(inch):7; Surface Treatment:Electoless Nickel Pl; |
SMITH BCR-7/8-X Cam Follower and Track Roller - Stud Type | Support Type:Two-Bolt Plummer Blo; Housing Width:3.3 in; Dimension H2:5.4 in; Bearing Number:LSM40BR; Maximum Speed:5400 rpm; Bearing - Housing - Seal:LSM40BRHRSS; Dimension H1:0.9 in; Seal Type:Viton Single Lip; Bearing UPC:013992029737; Shaft Size:40 mm; |
SMITH MCRV-80-S Cam Follower and Track Roller - Stud Type | Bearing Inner Dia. Shape:Cylindrical Bore Set; Unit, Type:Insert Bearing Unit; Diameter series symbol:Medium Load; Fit:J7; Unit Body Material:Cast Iron; Surface Treatment:No; Bearing Unit, Type:Square flange shape; Machining:No; |
SMITH MVYR-62 Cam Follower and Track Roller - Yoke Type | Bearing Retained:Yes (with retaining; Volume Discount:Available; Height H(mm):20; Width T(mm):15; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Shape:T-Shaped; Type:Bearings with Housin; Holder Surface Treatment:Black Oxide Coating; |
SMITH CR-2-1/2-XBC Cam Follower and Track Roller - Stud Type | G1 - Heat Generation Factor (Roller-Raceway):306; Aa - Cage-Cone Backface Clearance:5.1 mm; db - Cone Backface Backing Diameter:119.89 mm; Da - Cup Frontface Backing Diameter:187.96 mm; e - ISO Factor8:0.32; R - Cone Backface To Clear Radius1:3.300 mm; d:95.250 mm; Cage Type:Stamped Steel; C0 - Static Radial Rating:204000 lbf; Series:EH220700; |
SMITH MCR-80-SB Cam Follower and Track Roller - Stud Type | Characteristic inner ring frequency, BPFI:4.91 Hz; Brand:NTN; ra max:2.5 mm; Da max:167 mm; rs min:3 mm; da min:98 mm; d:85 mm; Characteristic outer ring frequency, BPF0:3.09 Hz; Characteristic cage frequency, FTF:0.39 Hz; Mass:4.23 kg; |
SMITH HR-1-XC Cam Follower and Track Roller - Stud Type | Da - Cup Frontface Backing Diameter:66.00 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2700 lbf; Aa - Cage-Cone Backface Clearance:7.6 mm; Db - Cup Backface Backing Diameter:60.96 mm; Design Units:Imperial; C1 - Dynamic Radial Rating (1 million revolutions)5:15100 lbf; R - Cone Backface To Clear Radius1:1.520 mm; G1 - Heat Generation Factor (Roller-Raceway):20.7; C90 - Dynamic Radial Rating (90 million revolutions)4:3920 lbf; |
SMITH HR-2-1/2 Cam Follower and Track Roller - Stud Type | Brand:SNR; Static load, C0:1,400 kN; Number of lubrication holes:3; Fatigue limit load, Cu:113 kN; Characteristic rolling element frequency, BSF:4.96 Hz; b:18.9 mm; d2:164.7 mm; D:280 mm; Y1:2.06; Nref:1,800 rpm; |
SMITH CR-1-1/2-XBC Cam Follower and Track Roller - Stud Type | B:50.800 mm; Aa - Cage-Cone Backface Clearance:4.6 mm; B - Cone Width:50.8 mm; Cup Part Number:L357010; Cone Part Number:L357040; Da - Cup Frontface Backing Diameter:380.00 mm; Cage Type:Stamped Steel; Cg - Geometry Factor:0.158; C1 - Dynamic Radial Rating (1 million revolutions)5:132000 lbf; a - Effective Center Location3:12.7 mm; |
SMITH HR-4-X Cam Follower and Track Roller - Stud Type | Width T(mm):11; Shape:Flange Type; Bearing Retained:Yes (with retaining; Number of Bearings:Single; RoHS:6; Flange Shape:Round Type; Bearing I.D. d(mm):12; Bearing Part Number:6901; Bearing Material:[Steel] Steel; |
SMITH CR-1-1/8-XBE Cam Follower and Track Roller - Stud Type Video